IEC 62838-2015 PDF

IEC 62838-2015 PDF

LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c.-Safety specifications

$50.44 $100.88 -50%
Product Code: IEC 62838
Stock In Stock
Edition: 1.0
Published: 10/2015
Number of Pages: 34
File Size: 0 files

Available Options

Product Description

LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. – Safety specifications

Introduction: This standard provides the requirements and conditions of compliance for the safety of semi- integrated LED lamps with supply voltages equal to or less than 50 V a.c. r.m.s. or equal to or less than 120 V ripple free d.c. The establishing of this standard does not exclude a future relocation as a sub-part of IEC 60968, self-ballasted lamps, or a merging with the standard for self-ballasted LED lamps with supply voltages greater than 50 V.

Scope: This International Standard specifies the safety and interchangeability requirements, together with the test methods and conditions, required to show compliance of LED lamps with integrated means for stable operation, intended for domestic and similar general lighting purposes, having: a rated power up to 60 W a rated voltage equal to or less than 50 V a.c. r.m.s. or equal or less 120 V ripple free d.c., caps according to Table 1. NOTE 1 The value of 60 W rated power is under consideration. Heat management may require lower power. This standard shall be used for products in conjunction with ELV lighting installations. With reference to IEC 60364-7-715, in ELV lighting installations only SELV sources are applied. Where bare conductors are used, the maximum lamp voltage shall be 25 V a.c. or 60 V d.c. The requirements of this standard relate only to type testing. For lamps > 25 V a.c. or 60 V d.c., recommendations for whole production testing or batch testing are given in IEC 60598-1 Table Q.1, column class III luminaire, column 4 or 5. NOTE 2 Where in this standard the term “lamp(s)” is used, it is understood to stand for semi-integrated LED lamp(s) with supply voltages as in the scope above, except where it is obviously assigned to other types of lamps. An overview of systems composed of LED modules, lamps and controlgear is given in IEC 62504. Supply voltage does not mean necessarily mains voltage, e.g. 230 V / 50 Hz. A semi-integrated LED lamp can also be driven on a supply voltage with 12 V a.c. or d.c. The control unit in the controlgear in a semi-integrated LED lamp then provides the conversion of 12 V a.c. or d.c. to a special current and voltage to power the LED inside the semi-integrated LED lamp. Schematically, the types of LEDni and LEDsi lamps are shown in Figure 1. IEC 62838:2015 © IEC 2015 – 7 – a) Example of a non-integrated LED lamp with supply voltage ≤ 50V b) Example of a semi-integrated LED lamp with supply voltage ≤ 50V, in the scope of this standard Key Converter not LED specific, but designed typically for incandescent or tungsten halogen lamps. Non-integrated LED light source, typically module. It may have an IEC 60061-1 conform cap which i

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62838-2015 PDF

IEC 62838-2015 PDF

$50.44 $100.88