IEC 62841-2-22 EXV-2025 PDF

IEC 62841-2-22 EXV-2025 PDF

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery-Safety-Part 2-22: Particular requirements for hand-held cut-off machines (Extended Version)

$525.21 $1,050.41 -50%
Product Code: IEC 62841-2-22 EXV
Stock In Stock
Edition: 1.0
Published: 06/2025
Number of Pages: 336
File Size: 1 file, 6.8 MB

Available Options

Product Description

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-22: Particular requirements for hand-held cut-off machines (Extended Version)

Introduction: Individual countries may wish to consider the application of this Part 1 of IEC 62841, so far as is reasonable, to tools not mentioned in an individual part of IEC 62841-2, IEC 62841-3 or IEC 62841-4 and to tools designed on new principles. Examples of standards dealing with non-safety aspects of hand-held tools, transportable tools and lawn and garden machinery are standards dealing with EMC aspects; standards dealing with environmental aspects.

Scope: This International Standard deals with the safety of electric motor-operated or magnetically driven: hand-held tools (IEC 62841-2); transportable tools (IEC 62841-3); lawn and garden machinery (IEC 62841-4). The above listed categories are hereinafter referred to as “tools” or “machines”. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Tools with electric heating elements are within the scope of this standard. Requirements for motors not isolated from the supply, and having basic insulation not designed for the rated voltage of the tools, are given in Annex B. Requirements for rechargeable battery-powered motor-operated or magnetically driven tools and the battery packs for such tools are given in Annex K. Requirements for such tools that are also operated and/or charged directly from the mains or a non-isolated source are given in Annex L. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This standard does not apply to: tools intended to be used in the presence of explosive atmosphere (dust, vapour or gas); tools used for preparing and processing food; tools for medical purposes; NOTE 1 IEC 60601 series covers a variety of tools for medical purposes. tools intended to be used with cosmetics or pharmaceutical products; heating tools; NOTE 2 IEC 60335-2-45 covers a variety of heating tools. electric motor-operated household and similar electrical appliances; NOTE 3 IEC 60335 series covers a variety of electric motor-operated household and similar electrical appliances. electrical equipment for industrial machine-tools; – 10 – IEC 62841-2-22:2025 EXV © IEC 2025 NOTE 4 IEC 60204 series

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62841-2-22 EXV-2025 PDF

IEC 62841-2-22 EXV-2025 PDF

$525.21 $1,050.41