IEC 62841-4-11-2026 PDF

IEC 62841-4-11-2026 PDF

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-11: Particular requirements for edgers

$255.36 $510.71 -50%
Product Code: IEC 62841-4-11
Stock In Stock
Edition: 1.0
Published: 06/2026
Number of Pages: 98
File Size: 1 file

Available Options

Product Description

This International Standard deals with the safety of electric motor-operated or magnetically driven: – hand-held tools (IEC 62841-2); – transportable tools (IEC 62841-3); – lawn and garden machinery (IEC 62841-4). The above listed categories are hereinafter referred to as “tools” or “machines”. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Tools with electric heating elements are within the scope of this standard. Requirements for motors not isolated from the supply, and having basic insulation not designed for the rated voltage of the tools, are given in Annex B. Requirements for rechargeable battery-powered motor-operated or magnetically driven tools and the battery packs for such tools are given in Annex K. Requirements for such tools that are also operated and/or charged directly from the mains or a non-isolated source are given in Annex L. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This standard does not apply to: – tools intended to be used in the presence of explosive atmosphere (dust, vapour or gas); – tools used for preparing and processing food; – tools for medical purposes; NOTE 1 IEC 60601 series covers a variety of tools for medical purposes. – tools intended to be used with cosmetics or pharmaceutical products; – heating tools; NOTE 2 IEC 60335-2-45 covers a variety of heating tools. – electric motor-operated household and similar electrical appliances; NOTE 3 IEC 60335 series covers a variety of electric motor-operated household and similar electrical appliances. – electrical equipment for industrial machine-tools; NOTE 4 IEC 60204 series deals with electrical safety of machinery. – small low voltage transformer operated bench tools intended for model making, e.g. the making of radio controlled model aircraft or cars, etc. NOTE 5 In the United States of America, the following conditions apply: This standard deals with tools used in non-hazardous locations in accordance with the National Electrical Code, NFPA 70. NOTE 6 In Canada, the following conditions apply: This standard deals with tools used in non-hazardous locations in accordance with the Canadian Electric Code, Part 1, CSA C22.1, and General Requirements – Canadian Electrical Code, Part II, CAN/CSA-C22.2 No. 0. This document applies to the following types of edgers – hand-held edgers having at least one ground-support; – walk-behind edgers and walk-beside edgers, where the plane of the blade-tip circle is designed to operate at not more than 15° from the vertical. The edgers to which this document applies have a blade-tip circle diameter of not more than 305 mm, and are equipped with a – cutting accessory; or – cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit and have a kinetic energy for each single cutting element of greater than 10 J. NOTE 101 Machines having cutting elements with a kinetic energy not exceeding 10 J are considered to be lawn edge trimmers and are covered by IEC 62841-4-4. This document does not apply to – lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws; – scissor type edgers and brush cutters; and – machines equipped with metallic cutting accessories consisting of more than one piece, e.g. pivoting chains or flail blades. NOTE 102 Lawn trimmers, lawn edge trimmers, brush cutters and brush saws are covered by IEC 62841-4-4. NOTE 103 Scissor type edgers and brush cutters will be covered by a future part of IEC 62841. NOTE 104 In Europe (EN IEC 62841-4-11), this document does not apply to edgers equipped with integral batteries.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62841-4-11-2026 PDF

IEC 62841-4-11-2026 PDF

$255.36 $510.71