Alarm and electronic security systems – Social alarm systems – Part 3: Local unit and controller
Introduction: This standard is part of the IEC 62851 series of International Standards and Technical Specifications “Alarm and electronic security systems – Social alarms systems“, written to include the following parts: Part 1: System requirements Part 2: Trigger devices Part 3: Local unit and controller Part 5: Interconnections and communications Part 7: Application guidelines (under consideration) A social alarm system provides 24 hours facilities for alarm triggering, identification, signal transmission, alarm reception, logging and 2-way speech communication, to provide reassurance and assistance for people living at home or at places under surveillance and considered to be at risk. A social alarm system is comprised of a number of system parts which can be configured in different ways to provide this functionality. A user can request assistance by the use of a manually activated trigger device resulting in an alarm triggering signal. In certain cases, alarm triggering signals can be generated by automatic trigger devices. A local unit or controller receives the alarm triggering signal, switching from the normal to the alarm condition and indicating this to the user (some systems use an optional pre-alarm condition that allows the user to reset the alarm for a short period of time). The controller normally transmits the alarm condition to an Alarm Receiving Centre (ARC) via the alarm transmission system. The ARC can either be local to the controller or remote from the controller. The
Scope: This part of IEC 62851 specifies the minimum requirements and tests for local units and controllers forming part of a social alarm system. This International Standard applies to local units and controllers that receive an alarm triggering signal from manually or automatically activated trigger devices and convert this into an alarm signal for transmission to the alarm receiving centre or an alarm recipient. The local unit and controller may be either separate units or integrated into one unit. The design should also take into consideration situations where the user may be unable to send an alarm, or where an unwanted alarm may be sent, due to technical malfunctions or poor ergonomic design.
Contents:
- FOREWORD
- INTRODUCTION
- Scope