IEC 62899-202-10-2023 PDF

IEC 62899-202-10-2023 PDF

Printed electronics-Part 202-10: Materials-Resistance measurement method for thermoformable conducting layer

$132.41 $264.81 -50%
Product Code: IEC 62899-202-10
Stock In Stock
Edition: 1.0
Published: 08/2023
Number of Pages: 30
File Size: 1 file, 2 Bytes

Available Options

Product Description

Printed electronics – Part 202-10: Materials – Resistance measurement method for thermoformable conducting layer

Introduction: In-mould-electronics (IME) manufacturing can include thermoforming during which two- dimensional electric films with conducting layers are thermoformed into three-dimensional shapes. During thermoforming, the substrate and printed layers will experience plastic strain leading to elongation (see Figure 1). The conductive layer’s resistance increases as a function of plastic strain. Designers of electric circuitry should know how much the resistance changes. Using a standardized measurement method ensures comparability of the results. NOTE 1 The top image shows a 2D substrate and ink stack after printing and cure. NOTE 2 The bottom image shows a substrate and ink stack after thermoforming into a 3D shape. The ink layers have been elongated. Figure 1 – Substrate with ink stack in 2D (top) and 3D (bottom) shape

Scope: This part of IEC 62899 defines terminology and measurement methods for the resistance change of conductive ink layer(s) as a function of thermoplastic elongation. The method measures resistance changes in-situ or post-elongation. This document is applicable to thermoformable substrates with conductive ink layers. The thermoformable substrates can have printed graphic ink as well and cover insulation layers.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62899-202-10-2023 PDF

IEC 62899-202-10-2023 PDF

$132.41 $264.81