IEC 62899-202-5-2018 PDF

IEC 62899-202-5-2018 PDF

Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an insulating substrate

$50.44 $100.88 -50%
Product Code: IEC 62899-202-5
Stock In Stock
Edition: 1.0
Published: 09/2018
Number of Pages: 20
File Size: 1 file, 473 Bytes

Available Options

Product Description

Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an insulating substrate

Introduction: The printing process is a highly promising technology for the fabrication of flexible devices. In particular, a printed conductive layer on an insulating substrate will be widely employed as an electrode or as an interconnect for flexible devices. It will be dealt with and commercialized as a type of composite material in which the conductive layer is formed on the substrate as a conductor. For a conductive film, the electrical property under mechanical deformation is very important because it is highly sensitive to mechanical stress and degrades well before the mechanical fracture. Therefore, a method for evaluating the conductivity of film materials provided by suppliers, sometimes including an in situ measurement system, is required in the industry as these are the basic materials which will be used in printed devices. Although some bending tests already exist, it is necessary to consider the unique characteristics of the printed films that are fabricated on a polymer substrate, which is weak under high temperature. These films are operated under severe mechanical deformations, unlike the conventional Si or glassbased conductive films. In this document, a mechanical bending test is described to evaluate the electrical property of a printed conductive layer on a substrate under repeated mechanical deformations. This sliding plate test method can be available for practical application in the industry by enabling the longterm reliability testing of printed film.

Scope: This International Standard specifies a mechanical bending test for evaluating the electrical properties of a printed conductive layer on an insulating substrate under repeated mechanical deformation.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62899-202-5-2018 PDF

IEC 62899-202-5-2018 PDF

$50.44 $100.88