IEC 62899-402-3-2021 PDF

IEC 62899-402-3-2021 PDF

Printed electronics-Part 402-3: Printability-Measurement of qualities-Voids in printed pattern using a two-dimensional optical image

$72.51 $145.02 -50%
Product Code: IEC 62899-402-3
Stock In Stock
Edition: 1.0
Published: 04/2021
Number of Pages: 22
File Size: 1 file, 2 Bytes

Available Options

Product Description

Printed electronics – Part 402-3: Printability – Measurement of qualities – Voids in printed pattern using a two-dimensional optical image

Introduction: This document contains fundamental information on the measurement of voids in a printed pattern in printed electronics. Void in this document is defined as a very small non-patterned part of a printed pattern, caused by the printing condition and ink properties, and treated as two-dimensional on a substrate. It can be seen that the terms void and pinhole used in the electronics and graphic printing industries, and the term void used in this document are different. There can be three kinds of absence of materials in the pattern. First, an absence of material inside the solid pattern, which is generally called void in the electronics industry. In this case, there is a vacancy inside the pattern but no imperfection area observed from a two-dimensional (2D) top-view. Therefore, it cannot be defined in the graphic printing industry where only two- dimensional (2D) images are meaningful. Second, there can be a hole penetrating from the surface of the printing layer to the substrate. This case can be observed as a hole in the printing area, and is called a pinhole in the electronics industry and a void in the graphic printing industry, respectively. The third one is a deep hole that does not penetrate into the substrate, therefore it is observed as a hollow in a 2D top-view of a printing image. In the electronics industry, this case is called hollow or pit, and in the graphic printing industry, it is called hollow or void in general. This document deals with the second and third cas

Scope: This part of IEC 62899 specifies the optical measurement method for acquiring two-dimensional images of voids and obtaining the void-related attributes in the dried or cured printed patterns which are part of the electronic products in the field of printed electronics. The measurable voids using this document are limited to those that are distinguishable by the optical image measurement. NOTE In this document, void means an imperfection of pattern observed from a two-dimensional (2D) top-view.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62899-402-3-2021 PDF

IEC 62899-402-3-2021 PDF

$72.51 $145.02