Secondary cells and batteries – Marking symbols for identification of their chemistry
Introduction: This document introduces uniform marking symbols for the identification of the secondary battery chemistries prevailing on the market. A primary reason is that lead smelters around the world are reporting increasing numbers of lithium ion batteries finding their way into the lead- acid battery waste stream. Because the shape and design of these batteries sometimes is very similar, it can be difficult for sorting facilities and battery smelters to distinguish one technology from the other if there is no clear identification of the battery chemistry by marking symbols. Processing lithium ion batteries within a lead smelter, e-waste facility, or municipal waste sorting facility, can result in fire or explosions, with numerous accidents or near-accidents already reported in European and US recycling facilities. Besides lead-acid and lithium ion batteries, the labelling scheme should also apply to other battery chemistries with a significant market share, such as nickel metal hydride and nickel cadmium. Other batteries, such as sodium ion batteries, should be included in the marking scheme when their market share becomes significant. A clear identification of the battery chemistry would be helpful throughout the entire battery lifetime, i.e. from the selection and purchase of a new battery (e.g. by economic operators as well as end users), to transportation, installation and use of the battery and then to waste battery collection, sorting, storage and treatment. The following stan
Scope: This document specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology). The markings described in this document are applicable for secondary cells,batteries,battery modules andmonoblocs with a volume of more than 900 cm3. The marking of the chemistry is useful for the installation, operation and decommissioning phases of battery life. The markings described in this document are applicable to secondary cells, batteries, battery modules, and monoblocs, when they are placed on the market for end use and when their battery volume exceeds 900 cm3. The chemistry marking is useful for the installation, operation and decommissioning phases in the battery's life cycle. Many recycling processes are chemistry specific, thus undesired events can occur when a battery which is not of the appropriate chemistry enters a given recycling process. Therefore, the battery is marked so as to identify its chemistry to ensure safe handling during sorting and recycling processes. This document defines the conditions of use of the markings indicating the chemistry of these secondary batteries. The details of markings and their application are defined in this document. NOTE Nothing in this document precludes the marking of batteries with recycling and chemistry symbols required by state, federal, national or regional laws or regulations or with a seal under license by a national recycling program. NOTE The 900 cm3 limit has been chosen because it is a reasonable compromise between larger format batteries and small batteries. On small batteries, the space for additional labels is limited which can result in a readability conflict.
Contents:
- FOREWORD
- INTRODUCTION
- Scope