Touch and interactive displays – Part 42-10: Measurement methods of motion-tracking image-control response time for interactive projection display
Introduction: Projection displays have a configuration allowing for the freedom of motion of both the first and the second objects and the third object(s) in the space between them. That is, the projection displays can interactively track the motions of the first, second, or third object using sensing devices such as a camera, a light detection and ranging (LiDAR) system, etc. As a result, the interactive projection displays with the motion-tracking system create new applications, such as image projection (projection mapping) from moving objects (e.g. vehicles, drones), projection mapping onto moving objects (e.g. dancers), interactive image control by human motions, or protecting a human body moving into a region of high-intensity light exposure from photobiological damage. Hence, quick shut-down systems are important for ensuring safety, and for smooth tracking of projection mapping onto moving objects. Therefore, response time (latency) of the motion-tracking image control system is a key performance indicator of the above interactive projection displays. Some advanced systems can track various complicated motions. However, this document provides fundamental measurement methods for measuring the response time of the motion-tracking image control systems, in which the image is controlled according to simple motions. The measurements can be carried out simply using small pattens, photodiodes (PD), and a high-speed oscilloscope. The complicated motions specific to the advanced systems are
Scope: This part of IEC 62908 specifies standard measurement conditions and fundamental measurement methods of response time of interactive projection displays with sensors detecting the motion of the projector, the projected image on the object, or the third objects, interactively controlling the projection image responding to the motions.
Contents:
- FOREWORD
- INTRODUCTION
- Scope