IEC 62920-2026 PDF

IEC 62920-2026 PDF

Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment

$239.59 $479.18 -50%
Product Code: IEC 62920
Stock In Stock
Edition: 2.0
Published: 10/2026
Number of Pages: 70
File Size: 1 file, 4.6 MB

Available Options

Product Description

Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment

Introduction: Background Power conversion equipment (PCE) is indispensable for solar photovoltaic power energy systems in order to convert the DC electric power energy generated by solar photovoltaic modules into AC or DC electric power, and to feed the AC power energy into the AC mains network or loads. PCE consists of DC to DC, DC to AC or AC to DC converters and forms systems with or without DC-coupled electrical energy storage devices. Manufacturers of PCE ensure the performance and reliability of PCE. Electromagnetic compatibility (EMC) is one aspect of performance which must be ensured wherever PCE is used in or exposed to an electromagnetic environment. IEC Guide 107 specifies that TC 77 and CISPR, which are called EMC committees, have responsibility for the development of basic, product family and generic standards on EMC requirements, and product committees must use the emission limits developed by EMC committees and must refer to basic immunity standards for the specification of test techniques. However, when the EMC standards which are developed by TC 77 and CISPR are not considered suitable for a particular product or electromagnetic environment, product committees must seek their assistance and advice for any change in either the emission limits or measurement requirements, or both. Product committees are responsible for selecting the appropriate immunity test items and levels for their products as well as for defining the relevant performance criteria for the evaluation of th

Scope: This document specifies electromagnetic compatibility (EMC) requirements for power conversion equipment (PCE) (e.g. DC to DC, DC to AC and AC to DC) for use in photovoltaic (PV) power systems with or without electrical energy storage devices. PCE covered by this document can be grid-interactive, which is termed as a grid connected power converter (GCPC), or stand-alone. It can be supplied by single or multiple photovoltaic modules grouped in various array configurations. The PCE can be intended for use in conjunction with batteries or other forms of energy storage and therefore a uni- or bidirectional. This document covers not only PCE connected to a public low voltage AC mains network or other low voltage AC mains installation, but also PCE connected to a medium or high voltage AC network with or without step-down power transformers. Requirements for the PCE connected to a medium or high voltage AC network are specified in this document. However, some requirements relevant to grid interconnection are addressed with other standards specifying power quality or their own grid codes in some countries. This document provides test methods and test conditions for PCE at a test site, but not for photovoltaic modules and other balance of system components. PCE which incorporates either radio transmit or receive, or both functions, as wireless communication functions, is included in the scope of this document as PCE with radio functionality. However, the emission requirements in this document are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU including their spurious emissions. When compliance with EMC requirements at the test site cannot be shown due to technical reasons of the test site, PCE can be assessed in situ. However, only high frequency emission requirements for in situ assessment are specified in CISPR 11.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62920-2026 PDF

IEC 62920-2026 PDF

$239.59 $479.18