Electronic displays – Part 2-1: Measurements of optical characteristics – Fundamental measurements
Introduction: This document describes the common optical measurement methods applicable in the field of electronic display devices, which can overlap with some of the parts of existing documents developed within TC 110 (IEC 61747-30-1 [1] 1 , IEC 62341-6-1, IEC 61988-2-1 [2], IEC 62715-5-1 [3]), that describe the optical measurement methods of the individual technologies, such as LCD, OLED, PDP and others. This document on common optical measurement methods is intended to be used as the reference document in future documents and in revisions of existing documents (e.g. IEC 61747-30-1, IEC 62341-6-1, IEC 61988-2-1, IEC 62715-5-1). The existing documents will be revised in their maintenance time to refer to this document to the largest extent possible. All documents in IEC TC 110 that are concerned with the measurement of optical properties of electronic displays refer to a set of methods and procedures that are similar to each other, or sometimes even identical. This document is intended to identify these methods and to describe them, together with suitable precautions and diagnostics, as a reference for forthcoming documents to make the work of the involved experts more efficient and to avoid duplication of efforts. Introduction of the common optical measurement method (COMM) is also related to a structure where each kind of optical measurement finds its unambiguous position for identification of similarities to other methods or for clarification of distinctions. This structural classifica
Scope: This part of IEC 62977 specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic display modules and systems. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to standard analogue or digital input signals that are not absolute luminance encoded. The input signal is relative RGB without metadata information that codes for real luminance, colour space or colour coordinates. These methods are limited to input signals with typical OETFs such as defined in IEC 61966-2-1, ITU BT. Rec. 601, ITU BT. Rec.709, and ITU BT. Rec.2020. The tests in this document are not approved for use with HDR input signals. NOTE A flat panel or flat panel display is a display with a flat surface and minimal depth that emits visible light from the surface. The display is subdivided into an array of electronically driven pixels which can be light valves modulating a backlight, or self-luminous. Emissive/transmissive/reflective hybrid displays can be flat panel or flat panel displays.
Contents:
- FOREWORD
- INTRODUCTION
- Scope