IEC 62977-2-7-2024 PDF

IEC 62977-2-7-2024 PDF

Electronic displays-Part 2-7 : Measurements of optical characteristics-Tiled displays

$100.88 $201.76 -50%
Product Code: IEC 62977-2-7
Stock In Stock
Edition: 1..0
Published: 03/2024
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Electronic displays – Part 2-7 : Measurements of optical characteristics – Tiled displays

Introduction: Tiled displays are widely used in a variety of places and in a variety of forms. Demand for tiled displays is expected to increase in the future. IEC TC 110 has already standardized various measurement methods to evaluate performance of electronic displays. However, in order to evaluate the performance of a tiled display, additional definitions of terms and new evaluation methods will be developed. The tiled display has repeatable elements that exist at various levels whose subsystems enable a highly configurable display system. In terms used in LED industries, for example the display system (first level of assembly) includes all subcomponents. It can come in any shape or size, curved, disconnected, etc. The cabinet (second level of assembly) typically includes a mechanical support structure with mechanical interconnects. The cabinet is also called a panel, chassis, or shell. The module (third level of assembly) typically includes optical elements (lowest level of assembly) with electrical interconnects, but will probably not have module-to-module mechanical interconnects. The module is also called a tile. As described above, the tiled display consists of a combination of subsystems of each level as illustrated in Figure 1. In this combination process, problems that did not appear on a single panel display can occur. Therefore, the optical properties caused by this problem will be checked at each level. Figure 1 – Example of tiled display system Depending on the final install

Scope: This part of IEC 62977 specifies standard measuring conditions and measurement methods for determining the optical characteristics of tiled displays which consist of multiple display modules in order to form one screen. These methods apply to emissive and transmissive direct view flat displays that render real 2D images with all modules lying in the same plane. The methods are applicable in environments where the measuring conditions can be controlled, such as laboratory and production testing. NOTE The measurement results are not specific values for the products. They can vary according to the measurement method and light measuring device (LMD) used in the calibration.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62977-2-7-2024 PDF

IEC 62977-2-7-2024 PDF

$100.88 $201.76