Electronic displays – Part 3-6: Evaluation of optical performance – Spatial resolution
Introduction: Historically, the size of a scanned dot drawn on a cathode-ray tube display with an electron beam was the main contributor to the display spatial resolution. Later, the pixel geometry of a conventional flat-panel display with red, green and blue (RGB) colour-filter elements in each pixel, such as RGB stripes, provides a simple metric to accurately estimate the display resolution. However, some recent display technologies use other subpixel arrangements or additional subpixel colours to render each incoming image pixel, thereby obscuring the pixel count, and the subpixel rendering affects the spatial performance of the display. Furthermore, the optical elements used in the display structure affect the spatial imaging performance. For example, a diffusing film can be overlaid on the front surface of a panel to improve the viewing direction performance and reduce the specular reflection of ambient light. However, such front surface diffusers generate optical interpixel crosstalk and sparkle, which degrade the spatial resolution characteristics of the display. Therefore, the spatial imaging performance of a display is typically not solely determined by the pixel count. It is important for an effective metrological method to be technologically agnostic and independent of the device architecture. Therefore, the pixel used in the spatial frequency unit of cycles/pixel can be logically defined by the standard image format of the input/output signal and not by the physical pixel struc
Scope: This part of IEC 62977 specifies the measuring and evaluation methods of spatial resolution of flat panel emissive displays, by determining their contrast modulation and modulation transfer function (MTF).
Contents:
- FOREWORD
- INTRODUCTION
- Scope