MIDI (musical instrument digital interface) specification 1.0 (Abridged Edition, 2015)
Introduction: IEC 63035 contains the same first 8 pages as in the MIDI 1.0 Detailed Specification (the original core specification text) published by the MIDI Manufacturers Association (MMA). These are included within this standard as Clauses 1 to 4. This specification was submitted to the IEC under the auspices of a special agreement between the IEC and the MMA. The MMA is a non-profit corporation that serves as a support organization and forum for the advancement and adoption of MIDI technology (along with the Association of Musical Electronics Industry, or AMEI, in Japan). The MIDI 1.0 technology dates back to 1983 when the protocol and electrical specification comprised 8 pages and the majority of the message identifiers were not yet defined. Over the subsequent years, the MMA and AMEI determined consensus of the worldwide MIDI industry, and defined numerous additional messages (via Confirmation of Approval documents), as well as many Recommended Practices for the use of MIDI technology, all the while maintaining MIDI as "1.0" (meaning that no significant changes were made to the initial specification). The MMA documentation for MIDI 1.0 now encompasses more than 50 different documents in print or on the World Wide Web. This standard contains the same first 8 pages as in the MMA’s MIDI 1.0 Detailed Specification but does not contain all of the subsequent information developed by MMA/AMEI. Rather, this document contains a complete listing (with basic description) of all defined MIDI mes
Scope: This International Standard specifies a hardware and software specification which makes it possible to exchange symbolic music and control information between different musical instruments or other devices such as sequencers, computers, lighting controllers, mixers, etc. using MIDI technology (musical instrument digital interface).
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- Introduction