Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices - Part 2: Test method for defects using optical inspection
Introduction: Silicon carbide (SiC) is widely used as a semiconductor material for next-generation power semiconductor devices. SiC, as compared with silicon (Si), has superior physical properties such as a higher breakdown electric field, higher thermal conductivity, lower thermal generation rate, higher saturated electron drift velocity, and lower intrinsic carrier concentration. These attributes realize SiC-based power semiconductor devices with faster switching speeds, lower losses, higher blocking voltages, and higher temperature operation relative to standard Si-based power semiconductor devices. SiC-based power semiconductor devices are not fully realized due to some issues including high costs, low yield, and low long-term reliability. In particular, one of the serious issues lies in the defects existing in SiC homoepitaxial wafers. Although efforts of decreasing defects in SiC homoepitaxial wafers are actively implemented, there are a number of defects in commercially available SiC homoepitaxial wafers. Therefore, it is indispensable to establish an international standard regarding the quality assessment of SiC homoepitaxial wafers. The IEC 63068 series of standards is planned to comprise Part 1, Part 2, and Part 3, as detailed below. This document provides definitions and guidance in use of optical inspection for detecting defects in commercially available silicon carbide (SiC) homoepitaxial wafers. Part 1: Classification of defects Part 2: Test method for defects using optical i
Scope: This part of IEC 63068 provides definitions and guidance in use of optical inspection for detecting as-grown defects in commercially available 4H-SiC (Silicon Carbide) epitaxial wafers. Additionally, this document exemplifies optical images to enable the detection and categorization of the defects for SiC homoepitaxial wafers. This document deals with a non-destructive test method for the defects so that destructive methods such as preferential etching are out of scope in this document.
Contents:
- FOREWORD
- INTRODUCTION
- Scope