IEC 63068-3-2020 PDF

IEC 63068-3-2020 PDF

Semiconductor devices-Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices-Part 3: Test method for defects using photoluminescence

$132.41 $264.81 -50%
Product Code: IEC 63068-3
Stock In Stock
Edition: 1.0
Published: 07/2020
Number of Pages: 56
File Size: 1 file, 2 Bytes

Available Options

Product Description

Semiconductor devices – Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices – Part 3: Test method for defects using photoluminescence

Introduction: Silicon carbide (SiC) is widely used as a semiconductor material for next-generation power semiconductor devices. SiC, as compared with silicon (Si), has superior physical properties such as a higher breakdown electric field, higher thermal conductivity, lower thermal generation rate, higher saturated electron drift velocity, and lower intrinsic carrier concentration. These attributes realize SiC-based power semiconductor devices with faster switching speeds, lower losses, higher blocking voltages, and higher temperature operation relative to standard Si-based power semiconductor devices. SiC-based power semiconductor devices are not fully realized due to some issues including high costs, low yield, and low long-term reliability. In particular, one of the serious issues lies in the defects existing in SiC homoepitaxial wafers. Although efforts of decreasing defects in SiC homoepitaxial wafers are actively implemented, there are a number of defects in commercially available SiC homoepitaxial wafers. Therefore, it is indispensable to establish an international standard regarding the quality assessment of SiC homoepitaxial wafers. The IEC 63068 series of standards is planned to comprise Part 1, Part 2, and Part 3, as detailed below. This document provides definitions and guidance in use of photoluminescence for detecting defects in commercially available silicon carbide (SiC) homoepitaxial wafers. Part 1: Classification of defects Part 2: Test method for defects using optical in

Scope: This part of IEC 63068 provides definitions and guidance in use of photoluminescence for detecting as-grown defects in commercially available 4H-SiC (Silicon Carbide) epitaxial wafers. Additionally, this document exemplifies photoluminescence images and emission spectra to enable the detection and categorization of the defects in SiC homoepitaxial wafers.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63068-3-2020 PDF

IEC 63068-3-2020 PDF

$132.41 $264.81