IEC 63075-2019 PDF

IEC 63075-2019 PDF

Superconducting ac power cables and their accessories for rated voltages from 6 kV to 500 kV-Test methods and requirements

$186.00 $371.99 -50%
Product Code: IEC 63075
Stock In Stock
Edition: 1.0
Published: 02/2019
Number of Pages: 54
File Size: 1 file, 1 Byte

Available Options

Product Description

Superconducting ac power cables and their accessories for rated voltages from 6 kV to 500 kV – Test methods and requirements

Introduction: As a result of major developments in superconducting cable systems with cold dielectric for medium- and high-voltage AC applications, CIGRE study committee B1 set up working group (WG) B1.31 in 2009 with the aim to prepare recommendations for testing superconducting AC cable systems for power transmission at a rated voltage of up to 150 kV. The recommendations of CIGRE WG B1.31 were published in TB 538 in June 2013 [1]1. At the time of preparation of the CIGRE recommendation, laboratory experience at voltages up to and including 275 kV was available, but operating experience was limited to 154 kV. At the time of preparation of this document, several projects up to 220 kV are in progress, and many others are planned for the near future. As the insulation system of high-temperature superconducting (HTS) cable systems considered in this document is comparable to oil-filled cable systems, it was agreed to extend the voltage range to 500 kV in order to be compatible with IEC 60141-1 [2]. In 2014, TC 20 decided to start the standardization work on testing of HTS AC cables based on the published CIGRE TB 538. Manufacturers of HTS cable systems, utilities as the main users, and independent test laboratories will benefit from this document. A list of relevant references is given in the Bibliography (see [3], [4], [5], [6]). __________ Numbers in square brackets refer to the Bibliography.

Scope: This document specifies test methods and requirements for high-temperature superconducting (HTS) AC power cable systems, cables and their accessories, for fixed installations, for rated voltages from 6 kV (Um = 7,2 kV) up to and including 500 kV (Um = 550 kV). The requirements apply to single-core, three-core and three-phase concentric cables with cold dielectric and their accessories that are not intended for fault current limitation purposes. This document does not cover special cables and their accessories, such as fault current limiting cables or submarine cables, for which modifications to the standard tests may be necessary or special test conditions may need to be devised. This document does not cover test methods and requirements for the cooling system. NOTE For considerations regarding cooling systems, refer to Annex A.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63075-2019 PDF

IEC 63075-2019 PDF

$186.00 $371.99