IEC 63169-2024 PDF

IEC 63169-2024 PDF

Electrical household and similar cooling and freezing appliances-Food preservation

$258.51 $517.01 -50%
Product Code: IEC 63169
Stock In Stock
Edition: 1.1
Published: 12/2024
Number of Pages: 64
File Size: 1 file, 5 Bytes

Available Options

Product Description

Electrical household and similar cooling and freezing appliances – Food preservation

Introduction: The weight loss test assesses some of the food care aspects of various compartments, sub- compartments and convenience features within a refrigerator. The test can be performed with real or artificial foods. Real foods have seasonal and regional variations, making them difficult for global use for repeatable and reproducible testing. Research was carried out on materials, which proved that a particular non-woven material was suitable to use to replicate real food. This non-woven material is used to replicate weight loss from food in the weight loss test. Consequently, this document contains an artificial material weight loss test. As much as possible, alignment has been made with the performance test standards IEC 62552-1 and IEC 62552-3. This document contains a link to the SC 59M Supporting Documents that are available on the IEC website. The SC 59M Supporting Documents include the 3D printing files, referred to in Annex B. These files are intended to be used as a complement, and do not form an integral part of the document.

Scope: This document deals with a test to simulate the weight loss of leafy produce, given certain conditions of temperature, humidity and air movement in one or more test zones. The test can only be applied to spaces larger than 200 mm × 150 mm ×100 mm (L × W × H). The aim of the test is to measure the weight loss rate by measuring the weight of a test tray prior to the test and after a given duration. NOTE Weight loss is one of the considerations for shelf life of produce. Other considerations such as condensation will be addressed in future amendments. This document deals with two food preservation tests. A weight loss test and a condensation test. The weight loss test simulates the weight loss of leafy produce, given certain conditions of temperature, humidity and air movement in one or more test zones. The aim of the test is to measure the weight loss rate by measuring the weight of a test tray prior to the test and again after a given duration. The condensation test simulates condensation produced by real food on surfaces of the test zone, given certain conditions of temperature, humidity and air movement in one or more test zones. This test assesses the condensation in refrigerator test zones by using test trays filled with non-woven fabric to generate condensation, and then evaluates the condensation extent and distribution. The weight loss test and condensation test apply to test zones that have an average operating temperature greater than 0 °C. Both the weight loss test and condensation test are performed in series and not in parallel on the same refrigerator. Both the weight loss test and the condensation test can only be applied to test zones having all dimensions exceeding 200 mm × 150 mm × 100 mm (L × W × H).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63169-2024 PDF

IEC 63169-2024 PDF

$258.51 $517.01