IEC 63182-1-2020 PDF

IEC 63182-1-2020 PDF

Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

$65.50 $131.00 -50%
Product Code: IEC 63182-1
Stock In Stock
Edition: 1.0
Published: 05/27/2020
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

Introduction: Magnetic powder core materials are distinct from ferrite materials. Whereas ferrites are homogeneous ceramic oxides, powder cores are heterogeneous magnetic alloys. Alloys which can include iron, nickel and other additives are prepared in fine powder form. The powder particles are insulated with non-conductive materials, and the resulting heterogeneous structure is formed by compaction into a core shape, such as a ring. Magnetic powder cores are suitable for use in inductors. They are characterized by low permeability, resistance to saturation under the influence of high currents, high flux densities, high Curie temperatures, as well as soft saturation, which is controlled, and gradual reduction in inductance with increasing DC bias field, even to very high levels of bias. The commonly used magnetic powder core materials are pure iron (Fe), iron-silicon-aluminium (FeSiAl), iron-silicon (FeSi), iron-nickel (FeNi), iron-nickel-molybdenum (FeNiMo), iron-silicon- chromium (FeSiCr), iron-based amorphous powder (FeSiB) and iron-based nanocrystalline (FeCuNbSiB) powder. Compliance with the requirements in the sectional specifications ensures basic mechanical interchangeability of complete assemblies and wound coils. The differences in loss, DC bias, and frequency response performance among materials, and among manufacturers, are significant, even though size and permeability can be identical for parts under comparison. Due to the method of manufacture and the physical nature of the

Scope: This part of IEC 63182 specifies the dimensions of magnetic powder cores. It is intended that this document will include magnetic powder cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial name for each powder core will appear with the part within the IEC 63182 series. This document also gives guidelines on the allowable limits of surface irregularities of magnetic powder cores. It is considered as a general specification useful in the dialogue between magnetic powder core manufacturers and users about surface irregularities.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63182-1-2020 PDF

IEC 63182-1-2020 PDF

$65.50 $131.00