Railway applications - Hydrogen and fuel cell systems for rolling stock - Part 1: Fuel cell power system
Introduction: This document considers general requirements for all fuel cell power systems installed onboard rolling stock for railway applications. IEC TC 105 is developing the IEC 62282 series, covering generic fuel cell technologies in different industrial sectors: IEC 62282-2 series on fuel cell modules; IEC 62282-3 series on stationary fuel cell power systems; IEC 62282-4 series on fuel cell power systems for propulsion and auxiliary power units These documents are often generic and do not cover the specific requirements for railway applications. Therefore, this document has been developed to specify the requirements for railway applications. This document is linked to IEC 63341-3, which specifies the performance test method to validate the fuel cell power system performance. This document with the other parts is used in conjunction with other related IEC standards for auxiliary equipment used for railway rolling stock applications. In addition, IEC TC 9 has developed the following standards for the subsystems, which are related or have interfaces to the fuel cell power system: IEC 62864-1:2016, Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system IEC 61287-1, Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods IEC 60349 (all parts), Electric traction - Rotating electrical machines for rail and road vehicles IEC 62928, Railway applications - Rolling stock -
Scope: This part of IEC 63341 applies to fuel cell power systems installed onboard rolling stock for railway applications (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives). Fuel cell power systems specified in this document are used for the traction power and the auxiliary supply of railway vehicles such as hybrid vehicles, and in case of use as an auxiliary onboard power source. This document applies to the fuel cell technology called proton exchange membrane fuel cell (PEMFC), with the use of hydrogen as fuel source and the use of air as oxidant source.1 This document does not apply for hydrogen fuel system which is specified in IEC 63341-2, as HFS is not within the scope of this document. This document does not apply for power conversion equipment which is specified in IEC 61287-1 and is not within the scope this document. This document specifies: the scope of supply and the description of the interfaces (fluidic, electrical, thermal and mechanical) of the fuel cell power system; the description of the environmental conditions; the specification and description of all the requirements to ensure the fuel cell power system conformance with a railway application; the process to validate the fuel cell power system sizing required for a specific load profile; the safety, reliability and protection requirements to design the fuel cell power system for a railway application; the marking and labelling requirements; the requirements related to storage, transportation, installation and maintenance; the tests (type, routine and investigation) required to validate the fuel cell power system.
Contents:
- FOREWORD
- INTRODUCTION
- Scope