IEC 63370-2022 PDF

IEC 63370-2022 PDF

Lithium-ion batteries and charging systems-Safety

$163.93 $327.86 -50%
Product Code: IEC 63370
Stock In Stock
Edition: 1.0
Published: 04/2022
Number of Pages: 80
File Size: 1 file, 1 Byte

Available Options

Product Description

Lithium-ion batteries and charging systems – Safety

Introduction: This document contains a subset of requirements from IEC 62841-1:2014 that are applicable for battery charging systems. The battery charging system includes the battery(ies) and its related charging circuitry. In many cases, the same battery charging system is utilized for a wide variety of end products. Therefore, the purpose of this document is to provide a means for evaluating a battery charging system for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. This evaluation can then be utilized over a wide range of products covered by IEC 62841 (all parts), without having to re-evaluate the battery charging system for each case where the battery charging system is utilized in or with a product. NOTE This document is structured in a way that other Technical Committees could reference this document in end product standards. For example, products outside of the scope of IEC 62841 (all parts) often use the same battery charging systems as in products covered by IEC 62841 (all parts). This document has been structured so that the clause and subclause numbers are aligned, as far as practical, with both the main body and Annex K of IEC 62841-1:2014. The following is a list of subclauses in IEC 62841-1:2014 that do not need to be repeated for battery charging systems evaluated to this document during product evaluations: 8.2, 8.6, 8.12, 8.14, 8.14.1, 20.2, 21.3, 21.22, 21.23, 21.24, 22.1, 22.4, 22.5, 23.1.4, 23.1.5, 23.1.7, 23.1.8, 23.4, 27.2

Scope: This document applies to the safety of lithium-ion batteries and charging systems for use in rechargeable battery-powered motor-operated or magnetically driven hand-held tools (IEC 62841-2), transportable tools (IEC 62841-3), and lawn and garden machinery (IEC 62841-4). The above listed categories are hereinafter referred to as "products". NOTE 1 This document is structured in a way that other Technical Committees could reference this document in end product standards. For example, products outside of the scope of IEC 62841 (all parts) often use the same battery charging systems as in products covered by IEC 62841 (all parts). The maximum nominal voltage assigned by the manufacturer for battery packs is 75 V DC. Electric shock hazard is considered to exist only between parts of opposite polarity, except for cases where batteries are charged by a non-isolated charger. Battery packs covered under this document intended to be charged by a non-isolated charger are evaluated by this document and to the requirements for protection against electric shock specified in IEC 62841-1:2014. When evaluating a battery pack for protection against electric shock, creepage distances, clearances and distances through insulation, the battery pack is fitted to the intended charger. Since battery packs covered under this document are submitted to different use patterns (such as rough use, high charging and discharging currents), their safety can be evaluated only by this document or by IEC 62841-1:2014 and not by using other standards for battery packs, such as IEC 62133-2:2017, unless otherwise indicated in this document. All relevant aspects related to the safety of batteries are addressed in this document, such that the requirements of IEC 62133-2:2017 need not be separately applied. For integral batteries, this document only applies to the integral battery when in combination with the product. When evaluating the risk of fire associated with batteries, consideration has been given to the fact that these batteries are unattended energy sources and have been evaluated as such in this document. Requirements in other documents regarding the risk of fire due to the charging of these b

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63370-2022 PDF

IEC 63370-2022 PDF

$163.93 $327.86