High pressure water jet machines - Safety - Part 3: High pressure spraying devices
Introduction: This document is a type-C standard as stated in ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: machine manufacturers (small, medium and large enterprises); health and safety bodies (regulators, accident prevention organizations, market surveillance etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: machine users/employers (small, medium and large enterprises); machine users/employees (e.g. trade unions, organizations for people with special needs); service providers, e.g. for maintenance (small, medium and large enterprises). The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.
Scope: This part of IEC 63458 contains safety-related requirements for spraying devices for high pressure water jet units with drives of all kinds (e.g. electric motor, internal combustion engine, air and hydraulic) in which pumps are used to generate pressure. This document deals with all significant hazards, hazardous situations and events arising during assembly, erection, operation and servicing relevant to spraying devices for high pressure water jet units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. All references to spraying devices for high pressure water jet units within this document include machines for one or more of the following industrial applications: cleaning; surface preparation; material removal; readjustment of concrete; cutting. NOTE 1 A list of significant hazards is given in informative Annex B. This document applies to spraying devices for mobile and fixed high pressure water jet units, in which the water pressure is generated by a pressure generator/pump and in which the maximum allowable working pressure is more than the upper limit fixed in the scope of IEC 60335-2-79. NOTE 2 35 MPa is currently the upper limit for machines covered by IEC 60335-2–79. This document does not cover: high pressure cleaners which are dealt with in IEC 60335-2-54; NOTE 3 IEC 60335-2–54 applies to steam cleaners for household use. IEC 60335-2–79 applies to high pressure cleaners having a rated pressure not less than 2,5 MPa and not exceeding 35 MPa, as well as steam cleaners and those parts of hot water high pressure cleaners incorporating a steam stage which have a capacity not exceeding 100 l, a rated pressure not exceeding 2,5 MPa and a product of capacity and rated pressure not exceeding 5 MPa. additional hazards due to the incorporation of high pressure water jet units into other process-technology machines; specific hazards associated with explosive atmospheres, use on ships or ambient temperatures outside the range 5 °C to 40 °C; hazards due to the nature of liquids used for jetting, other than that due to pressure; hazards associated with the drives or specific hazards due to any heat ge
Contents:
- FOREWORD
- INTRODUCTION
- Scope