IEC GUIDE 112-2017 PDF

IEC GUIDE 112-2017 PDF

Guide on the safety of multimedia equipment

$15.77 $31.53 -50%
Product Code: IEC GUIDE 112
Stock In Stock
Edition: 4.0
Published: 06/2017
Number of Pages: 12
File Size: 1 file, 188 Bytes

Available Options

Product Description

Guide on the Safety of Multimedia Equipment

Introduction: This Guide contains guidelines for using the current editions of IEC 60065 and IEC 60950-1 in evaluating the safety of multimedia equipment. The following fundamental principle was adopted as the basis for this Guide: Equipment complying with the requirements of IEC 60065, as well as equipment complying with the requirements of IEC 60950-1, is considered to be safe when used on its own. Such equipment when interconnected in multimedia systems in accordance with the installation instructions is also considered to be safe. It should be noted that there are a number of differences between the two standards. Requirements which should be fulfilled in addition to those in the current two standards are specified in this Guide. Additional clarifications are under consideration for both publications in TC 108. Whenever IEC 60065 or IEC 60950-1 are amended or revised, or technical or market conditions change significantly, ACOS will consider this Guide for revision. In addition, it should be noted that IEC 62368-1 may be used as an alternative to either IEC 60065 or IEC 60950-1. For a multimedia system containing Class I and Class II equipment, the connection to the supply should ensure a reliable connection to protective earth for Class I equipment.

Scope: This Guide contains guidelines for using the current editions of IEC 60065 and IEC 60950-1 in evaluating the safety of multimedia equipment. This Guide focuses on the use of IEC 60065 or IEC 60950-1. As an alternative to both standards, IEC 62368-1 may be used. Reference publications IEC 60065:2014, Audio, video and similar electronic apparatus – Safety requirements IEC 60950-1:2005, Information technology equipment – Safety – Part 1: General requirements IEC 60950-1:2005/AMD1:2009 IEC 60950-1:2005/AMD2:2013 IEC 62368-1, Audio/video, information and communication technology equipment – Part 1: Safety requirements Guidelines 3.1 Compliance Equipment for use in multimedia systems should comply with: IEC 60065 or IEC 60950-1, according to the manufacturer’s choice; and the additions listed in Clause 3. As explained in Clause 1, this Guide focuses on the use of IEC 60065 or IEC 60950-1. Alternatively, IEC 62368-1 may be considered. 3.2 General requirements IEC 60065:2014, Clause 3: this clause is applicable. IEC 60950-1:2005, 1.3: no additions required. 3.3 Marking IEC 60065:2014, Clause 5: this clause is applicable together with the following addition to 5.5: For equipment covered by IEC 60065 intended for use in multimedia systems, the instructions for use and installation should give the necessary information to ensure correct and safe installation and interconnection of the equipment. IEC 60950-1:2005, IEC 60950-1:2005/AMD1:2009 and IEC 60950-1:2005/AMD2:2013, 1.7: no additions required.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC GUIDE 112-2017 PDF

IEC GUIDE 112-2017 PDF

$15.77 $31.53