IEC 60034-27-1-2017 PDF

IEC 60034-27-1-2017 PDF

Rotating electrical machines-Part 27-1: Off-line partial discharge measurements on the winding insulation

$239.59 $479.18 -50%
Product Code: IEC 60034-27-1
Stock In Stock
Edition: 1.0
Published: 12/2017
Number of Pages: 138
File Size: 1 file, 2 Bytes

Available Options

Product Description

Rotating electrical machines – Part 27-1: Off-line partial discharge measurements on the winding insulation

Introduction: For many years, the measurement of partial discharges (PD) has been employed as a means of assessing the quality of new insulation systems and the condition of aged insulation systems. It is also considered as a means of detecting localized sources of PD in used electrical winding insulation arising from operational stresses in service. Compared with other dielectric tests (e.g. the measurement of dissipation factor or insulation resistance) the differentiating character of partial discharge measurements allows PD sources within the insulation system to be detected. In connection with the servicing and overhaul of rotating machines, the measurement and analysis of partial discharges can also provide information on: presence of ageing effects and potential defects in the insulating system; ageing processes; further measures and intervals between overhauls. Although the PD testing of rotating machines has gained widespread acceptance, it has emerged from several studies that not only are there different methods of measurement in existence but also the criteria and methods of analysing and finally assessing the measured data are often different and not comparable. Consequently, there is a need to give some guidance to those users who are considering the use of PD measurements to assess the condition of their insulation systems. Partial discharge testing of stator windings can be divided into two broad groups: a) off-line measurements, in which the stator winding is isolated from

Scope: This part of IEC 60034 provides a common basis for: measuring techniques and instruments; the arrangement of test circuits; normalization and testing procedures; noise reduction; the documentation of test results; the interpretation of test results, with respect to partial discharge off-line measurements on the winding insulation of rotating electrical machines. The measurement methods described in this document are applicable to stator windings of machines with or without conductive slot coating and to the stator windings of machines made with form wound or random wound windings. In special cases like high voltage rotor field windings, this document is applicable as well. The measurement methods are applicable when testing with alternating sinusoidal voltages from 0,1 Hz up to 400 Hz. Interpretation guidelines are given in this document and are applicable only if all the following requirements are fulfilled: Measurements performed with power frequency of 50 Hz or 60 Hz, or when testing with power supply within a frequency range of 45 Hz to 65 Hz. Form wound windings and winding components such as bars and coils. Winding with conductive slot coating. This is usually valid for machines with voltage rating of 6 kV and higher. For machines with random wound windings, form-wound windings without conductive slot coating, and testing at frequencies differing from power frequencies, the interpretation guidelines are not applicable. The testing procedures for off-line PD-measurements of this document can be used for assessing the uniform quality of manufacturing or/and the trending of these kind of windings as well as converter driven machine windings. NOTE Testing of low voltage machines with so called Type I insulation systems is defined in reference [10]1. Testing procedures for qualification of converter driven high voltage machines with so called Type II insulation systems are dealt with in IEC 60034-18-42 (in addition to the optional electric tests described therein).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-27-1-2017 PDF

IEC 60034-27-1-2017 PDF

$239.59 $479.18