IEC 60034-30-1-2025 PDF

IEC 60034-30-1-2025 PDF

Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

$132.41 $264.81 -50%
Product Code: IEC 60034-30-1
Stock In Stock
Edition: 2.0
Published: 12/2025
Number of Pages: 58
File Size: 1 file

Available Options

Product Description

Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

Introduction: This first part of the IEC 60034-30 series, IEC 60034-30-1, provides for the global harmonization of energy efficiency classes of electric motors. It deals with all kinds of electric motors that are rated for line operation (including starting at reduced voltage). This includes either 50 Hz or 60 Hz, or both single- and three-phase low voltage induction motors, regardless of their rated voltage, as well as line-start synchronous motors. The second part of this standard series (IEC 60034-30-2) is prepared for motors rated for variable voltage and frequency supply. This second edition of IEC 60034-30-1 introduces a new efficiency class, IE5. It is important to note that International Energy efficiency (IE) class definition is generally independent of the output power – frame size assignment. As standardized dimensions and outputs in the IEC 60072 series are based on today's technology (up to IE4), it can be challenging to implement highest IE classes according to existing frame sizes. It is possible that motors, especially those with lower output power ratings, are designed and manufactured in one frame size bigger than frame size assigned in IEC 60072-1 to reach IE4 and IE5 efficiency levels. For a given power and frame size it is generally easier to achieve a higher motor efficiency when the motor is designed for and operated directly on-line with a 60 Hz supply frequency rather than on 50 Hz as explained in Note 1. NOTE 1 As the utilization and size of motors are related to

Scope: This part of IEC 60034 specifies efficiency classes for single-speed electric motors that are rated in accordance with IEC 60034-1 or IEC 60079-0 and are rated for operation on a sinusoidal either 50 Hz or 60 Hz, or both voltage supply. The motors within this document: have a rated power PN from 0,12 kW to 1 000 kW; have a rated voltage UN from 50 V up to and including 1 000 V; have 2, 4, 6 or 8 poles; are capable of continuous operation at their rated power with a temperature rise within the specified insulation temperature class; NOTE 1 Most motors covered by this document are rated for duty type S1 (continuous duty). However, some motors that are rated for other duty cycles are still capable of continuous operation at their rated power, and these motors are also covered by this document. are marked with any ambient temperature within the range of –30 °C to +60 °C; NOTE 2 The rated efficiency and efficiency classes are based on 25 °C ambient temperature in accordance with IEC 60034-2-1. NOTE 3 Motors exclusively rated for temperatures outside the range –30 °C and +60 °C are considered to be of special construction and are consequently excluded from this document. NOTE 4 Smoke extraction motors with a temperature class of up to and including 400 °C are covered by this document. are marked with an altitude up to 4 000 m above sea level. NOTE 5 The rated efficiency and efficiency class are based on a rating for altitudes up to 1 000 m above sea level. This document establishes a set of nominal efficiency values based on supply frequency, number of poles and motor output power. No distinction is made between motor technologies, supply voltage or motors with increased insulation designed specifically for converter operation even though not all motor technologies are capable of reaching the higher efficiency classes (see Table 1). This makes different motor technologies fully comparable with respect to their energy efficiency potential. The efficiency of power-drive systems is not covered by this document. Motor losses due to harmonic content of the supply voltage, losses in cables, filters and frequency-converters, are not covered. Motors with flanges, feet or shaf

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-30-1-2025 PDF

IEC 60034-30-1-2025 PDF

$132.41 $264.81