IEC 60034-30-2008 PDF

IEC 60034-30-2008 PDF

Rotating electrical machines-Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)

$72.51 $145.02 -50%
Product Code: IEC 60034-30
Stock In Stock
Edition: 1.0
Published: 10/2008
Number of Pages: 40
File Size: 1 file, 974 Bytes

Available Options

Product Description

Rotating electrical machines – Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)

Introduction: This International Standard provides for the global harmonization of energy-efficiency classes for electric motors. Electric motor applications in industry consume between 30 % and 40 % of the generated electrical energy worldwide. Improving efficiency of the complete drive system (i.e. motor and adjustable-speed drives) including the application (or process) is therefore a major concern in energy-efficiency efforts. The total energy saving potential of an optimized system is assumed to be around 30 % to 60 %. According to the findings of the IEA 7 July 2006 Motor Workshop, electric motors with improved efficiency in combination with frequency converters can save about 7 % of the total worldwide electrical energy. Roughly one quarter to one third of these savings come from the improved efficiency of the motor. The remaining part results from system improvements. Many different energy efficiency standards for cage induction motors are already in use (NEMA, EPACT, CSA, CEMEP, COPANT, AS/NZS, JIS, GB and others) with new classes currently being developed. It becomes increasingly difficult for manufacturers to design motors for a global market and for customers to understand differences and similarities of standards in different countries. Motors from 0,75 kW up to 375 kW make up the vast majority of installed motor population and are covered by this standard as shown in Figure 1. Allocation of the saving potential by installed motors in the industrial sector (installed capacity

Scope: This part of IEC 60034 specifies efficiency classes for single-speed, three-phase, 50 Hz and 60 Hz, cage-induction motors that: have a rated voltage UN up to 1 000 V; NOTE The standard also applies to motors rated for two or more voltages and/or frequencies. have a rated output PN between 0,75 kW and 375 kW; have either 2, 4 or 6 poles; are rated on the basis of either duty type S1 (continuous duty) or S3 (intermittent periodic duty) with a rated cyclic duration factor of 80 % or higher; are capable of operating direct on-line; are rated for operating conditions in accordance with IEC 60034-1, Clause 6. Motors with flanges, feet and/or shafts with mechanical dimensions different from IEC 60072-1 are covered by this standard. Geared motors and brake motors are covered by this standard although special shafts and flanges may be used in such motors. Excluded are: Motors made solely for converter operation in accordance with IEC 60034-25. Motors completely integrated into a machine (for example pump, fan and compressor) that cannot be tested separately from the machine.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-30-2008 PDF

IEC 60034-30-2008 PDF

$72.51 $145.02