IEC 60034-4-2008 PDF

IEC 60034-4-2008 PDF

Rotating electrical machines-Part 4: Methods for determining synchronous machine quantities from tests

$239.59 $479.18 -50%
Product Code: IEC 60034-4
Stock In Stock
Edition: 3.0
Published: 05/2008
Number of Pages: 158
File Size: 1 file, 1 Byte

Available Options

Product Description

Rotating electrical machines – Part 4: Methods for determining synchronous machine quantities from tests

Scope: This part of IEC 60034 applies to three-phase synchronous machines of 1 kVA rating and larger with rated frequency of not greater than 500 Hz and not less than 10 Hz. Most of the methods are intended to be used for machines having an excitation winding with slip-rings and brushes for their supply. Synchronous machines with brushless excitation require special effort for some of the tests. For machines with permanent magnet excitation, there is a limited applicability of the described tests, and special precautions have to be taken against irreversible demagnetization. Excluded are axial-field machines and special synchronous machines such as inductor type machines and transversal flux machines. It is not intended that this standard be interpreted as requiring any or all of the tests described therein on any given machine. The particular tests to be carried out shall be subject to agreement between manufacturer and customer.

Contents:

  • FOREWORD
  • Scope
  • 6.10 On-load test measuring the load angle
  • 6.11 Low slip test
  • 6.12 Sudden three-phase short-circuit test
  • 6.13 Voltage recovery test
  • 6.14 Suddenly applied short-circuit test following disconnection from line
  • 6.15 Direct current decay test in the armature winding at standstill test
  • 6.16 Suddenly applied excitation test with armature winding open-circuited
  • 6.17 Applied voltage test with the rotor in direct and quadrature axis positions
  • 6.18 Applied voltage test with the rotor in arbitrary position
  • 6.19 Single phase voltage test applied to the three phases
  • 6.20 Line-to-line sustained short-circuit test
  • 6.21 Sudden line-to-line short-circuit
  • 6.22 Line-to-line and to neutral sustained short-circuit test
  • 6.23 Negative-phase sequence test
  • 6.24 Field current decay test, with the armature winding open-circuited
  • 6.24.1 Test at rated speed
  • 6.24.2 Test at standstill
  • 6.25 Field current decay test at rated speed with the armature-winding short-
  • 6.26 Suddenly applied excitation with armature winding short-circuited

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60034-4-2008 PDF

IEC 60034-4-2008 PDF

$239.59 $479.18