IEC 60068-2-45-1980 PDF

IEC 60068-2-45-1980 PDF

Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents

$31.53 $63.05 -50%
Product Code: IEC 60068-2-45
Stock In Stock
Edition: 1.0
Published: 1980
Number of Pages: 26
File Size: 1 file, 760 KB

Available Options

Product Description

Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents

Scope: This standard comprises a test procedure whereby specimens to be tested are immersed in a certain solvent at a specified temperature and for a specified time. If required by the relevant specification, after immersion and drying, specimens shall be rubbed with cotton wool or wrapping tissue paper. Guidance on the test is given in the appendix. 2. Object To determine the effects of prescribed cleaning solvents on electronic components and other parts suitable to be mounted on printed boards when subjected to immersion in the cleaning solvents stated below. Note. —This test is not intended to simulate the effects of handling. 3. Types of test solvents and conditions 3.1 Solvents Two commonly used solvents are specified for the purpose of this test. Note. — Successful compliance with this test does not imply resistance to other solvents. 3.1.1 A mixture of 1,1,2-trichlorotrifluoroethane, 70 ± 5°lo by weight and 2- propanol (isopropyl alcohol), 30 ± 5°lo by weight. Commercially available grades (industrial use) shall be used. Notes 1. — 1,1,2-trichlorotrifluoroethane will be hereinafter referred to as R 113, in accordance with ISO/ R 817-1974. 2. — The above mixture is obtainable as a finished product from suppliers of chemicals. 3.1.2 Demineralized or distilled water having a resistivity of not less than 500 nm corresponding to a conductivity of 2 mS/m. Note_ — In technically justified cases other solvents similar in activity to the recommended ones may be used as prescribed in the relevant specifications. 3.2 Test conditions 3.2.1 Solvent temperatures For the solvent specified in Sub-clause 3.1.1, one of the following temperatures shall be chosen: 23 ± 5 °C 48.6 °C to 50.5 °C (boiling temperature).

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60068-2-45-1980 PDF

IEC 60068-2-45-1980 PDF

$31.53 $63.05