IEC 60068-2-52 (REDLINE + STANDARD)-2017 PDF

IEC 60068-2-52 (REDLINE + STANDARD)-2017 PDF

Environmental testing-Part 2-52: Tests-Test Kb: Salt mist, cyclic (sodium chloride solution)

$85.75 $171.50 -50%
Product Code: IEC 60068-2-52 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 11/2017
Number of Pages: 42
File Size: 1 file, 1.3 MB

Available Options

Product Description

Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic (sodium chloride solution)

Introduction: The mechanism of salt corrosion on metallic materials in a chloride-containing atmosphere is electrochemical, whereas the degradation effects experienced on non-metallic materials are caused by complex chemical reactions of the salts with the materials involved. The rate at which corrosive action takes place is dependent, to a large extent, on the supply of oxygenated salt solution to the surface of the test specimen(s), the temperature of the test specimen(s) and the temperature and humidity of the environment. Apart from the corrosive effects, this cyclic salt mist test may be used to indicate deterioration of some non-metallic materials by assimilation of salts. In the various test methods described in this document, the period of spraying with the relevant salt solution is sufficient to wet the test specimen(s) thoroughly. Because this wetting is repeated after intervals of storage under humid conditions (severities (1) and (2)) and in some cases severities ((3) to (6)) – supplemented by storage under a standard atmosphere for testing, it goes some way to reproducing the effects of natural environments. Furthermore, considering natural environments for corrosion on metallic materials, neutral or acidified salt solution spray, humid, and dry conditions are also important factors as a cyclic corrosion test. Each condition is repeated after intervals of other conditions in different combinations to achieve corrosion on metallic materials and to get acceleration of corrosion.

Scope: This test is intended for application to components or equipment designed to withstand a salt- laden atmosphere, depending on the chosen severity. Salt can degrade the performance of parts manufactured using metallic and/or non-metallic materials. Severities (1) and (2) are intended to be used for testing products which are used in a marine environment, or in close proximity to the sea. Severity (1) should be used to test products which are exposed to the environment for much of their operational life (e.g. ship radar, deck equipment). Severity (2) should be used to test products which may be exposed to the marine environment from time to time but will normally be protected by an enclosure (e.g. navigational equipment which will normally be used on the bridge or in a control room). Additionally, severities (1) and (2) are commonly used as a general corrosion test in component quality assurance procedures. Severities (3) to (6) are intended for products where, under normal use, there is a frequent change between salt-laden and dry atmosphere, e.g. automobiles and their parts. Severities (3) to (6), compared to severities (1) and (2), therefore include an additional storage under a standard atmosphere for testing. The period of dry atmosphere may happen, in practice, during breaks of operation, e.g. during the weekend. This inclusion of such a dry period in severities (3) to (6) leads to corrosion mechanism which can be quite different from those under constant humid conditions. The test is accelerated compared with most service conditions. However, it is not possible to establish an overall acceleration factor for all kinds of specimens (see IEC 60355). This part of IEC 60068-2 specifies the application of the cyclic salt mist test to components or equipment designed to withstand a salt-laden atmosphere as salt can degrade the performance of parts manufactured using metallic and/or non-metallic materials.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60068-2-52 (REDLINE + STANDARD)-2017 PDF

IEC 60068-2-52 (REDLINE + STANDARD)-2017 PDF

$85.75 $171.50