Environmental Testing Part 2: Test Methods Test Ff: Vibration - Time-History Method
Introduction: This part of IEC 60068 details methods for testing components, equipment and other electrotechnical products (hereinafter referred to as “specimens”) which in service can be subjected to random or oscillating type dynamic forces of short duration, typical examples of which are the stresses induced in equipment as a result of earthquakes, explosions and certain phases of transportation, or by transient, short time vibration in machinery. The characteristics of these forces and the damping of the specimen may be such that the vibration response of the specimen will not reach a steady-state condition. The time-history test consists, after any preliminary vibration response investigation with sinusoidal or random vibration, in subjecting the specimen to a vibration (acceleration, velocity or displacement) the time history being specified by a response spectrum with characteristics simulating the effects of the dynamic forces. A time history may be developed or obtained from a natural event (natural time history), a random sample a synthesized signal artificial time history. In general, to adapt to the required testing severity, some modification is necessary. The use of a time history allows a single test wave to envelop a broadband response spectrum. It is possible for all the modes of the structure in the excitation axis (or axes) to be excited at the same time and consequently the stresses derived from the combined effects of the coupled modes are generally taken into account.
Scope: This part of IEC 60068 provides a standard procedure for determining, by the time-history and sine-beat methods, the ability of a specimen to withstand specified severities of transient vibration.
Contents:
- FOREWORD
- INTRODUCTION
- Scope