IEC 60076-12-2008 PDF

IEC 60076-12-2008 PDF

Power transformers-Part 12: Loading guide for dry-type power transformers

$163.93 $327.86 -50%
Product Code: IEC 60076-12
Stock In Stock
Edition: 1.0
Published: 11/2008
Number of Pages: 74
File Size: 1 file, 1 Byte

Available Options

Product Description

Power transformers – Part 12: Loading guide for dry-type power transformers

Introduction: This part of IEC 60076 provides guidance for the specification and loading of dry type power transformers from the point of view of operating temperatures and thermal ageing. It provides the consequence of loading above the nameplate rating and guidance for the planner to choose appropriate rated quantities and loading conditions for new installations. IEC 60076-11 is the basis for contractual agreements and it contains the requirements and tests relating to temperature-rise figures for dry type power transformers during continuous rated loading. It should be noted that IEC 60076-11 refers to the average winding temperature rise while this part of IEC 60076 refers mainly to the hot-spot temperature and the latter stated values are provided only for guidance. This part of IEC 60076 gives mathematical models for judging the consequence of different loading, with different temperatures of the cooling medium, and with transient or cyclical variation with time. The models provide for the calculation of operating temperatures in the transformer, particularly the temperature of the hottest part of the winding. This hot-spot temperature is used for estimation of the number of hours of life time consumed during a particular time period. This part of IEC 60076 further presents recommendations for limitations of permissible loading according to the results of temperature calculations or measurements. These recommendations refer to different types of loading duty – continuous loading, sh

Scope: This part of IEC 60076 is applicable to dry-type transformers according to the scope of IEC 60076-11. It provides the means to estimate ageing rate and consumption of lifetime of the transformer insulation as a function of the operating temperature, time and the loading of the transformer. NOTE For special applications such as wind turbine application transformers, furnace transformers, welding machine transformers, and others, the manufacturer should be consulted regarding the particular loading profile.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 5.10 Determination of winding time constant
  • 5.10.1 General
  • 5.10.2 Time constant calculation method
  • 5.10.3 Time constant test method
  • 5.11 Determination of winding time constant according to empirical constant
  • 5.12 Calculation of loading capability

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60076-12-2008 PDF

IEC 60076-12-2008 PDF

$163.93 $327.86