IEC 60076-18-2012 PDF

IEC 60076-18-2012 PDF

Power transformers-Part 18: Measurement of frequency response

$186.00 $371.99 -50%
Product Code: IEC 60076-18
Stock In Stock
Edition: 1.0
Published: 07/2012
Number of Pages: 94
File Size: 1 file, 1 Byte

Available Options

Product Description

Power transformers – Part 18: Measurement of frequency response

Scope: This part of the IEC 60076 series covers the measurement technique and measuring equipment to be used when a frequency response measurement is required either on-site or in the factory either when the test object is new or at a later stage. Interpretation of the result is not part of the normative text but some guidance is given in Annex B. This standard is applicable to power transformers, reactors, phase shifting transformers and similar equipment. Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 frequency response amplitude ratio and phase difference between the voltages measured at two terminals of the test object over a range of frequencies when one of the terminals is excited by a voltage source Note 1 to entry: The frequency response measurement result is a series of amplitude ratios and phase differences at specific frequencies over a range of frequency. Note 2 to entry: The measured voltage is the voltage developed across an impedance and so it is also related to current. 2.2 frequency response analysis FRA technique used to detect damage by the use of frequency response measurements Note 1 to entry: The terms SFRA and IFRA are commonly used and refer to the use of either a swept frequency voltage source or an impulse voltage source. Provided the measuring equipment complies with the requirements of Clause 5, this standard can be applied to both techniques. 2.3 source lead lead connected to the voltage source of the measuring instrument used to supply an input voltage to the test object 2.4 reference lead Vin lead connected to the reference channel of the measuring instrument used to measure the input voltage to the test object 2.5 response lead Vout lead connected to the response channel of the measuring instrument used to measure the output voltage of the test object – 46 – 60076-18 © CEI:2012 AVANT-PROPOS .................................................................................................................. 49 Domaine d'application .................................................................................................... 51 Termes et définitions ..............................

Contents:

  • FOREWORD
  • Scope
  • 4.4.10 Method for specifying additional measurements

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60076-18-2012 PDF

IEC 60076-18-2012 PDF

$186.00 $371.99