IEC 60079-10-1 (REDLINE + STANDARD)-2015 PDF

IEC 60079-10-1 (REDLINE + STANDARD)-2015 PDF

Explosive atmospheres-Part 10-1: Classification of areas-Explosive gas atmospheres

$434.42 $868.83 -50%
Product Code: IEC 60079-10-1 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 09/2015
Number of Pages: 268
File Size: 1 file

Available Options

Product Description

Explosive atmospheres – Part 10-1: Classification of areas – Explosive gas atmospheres

Introduction: In areas where dangerous quantities and concentrations of flammable gas or vapour may arise, protective measures are need to be applied in order to reduce the risk of explosions. This part of IEC 60079 sets out the essential criteria against which the ignition hazards can be assessed, and gives guidance on the design and control parameters which can be used in order to reduce such hazards.

Scope: This part of IEC 60079 is concerned with the classification of areas where flammable gas or vapour or mist hazards (see Notes 1, 2 and 3) may arise and may then be used as a basis to support the proper selection and installation of equipment for use in hazardous areas. It is intended to be applied where there may be an ignition hazard due to the presence of flammable gas or vapour, mixed with air under normal atmospheric conditions (see Note 4), but it does not apply to: a) mines susceptible to firedamp; b) the processing and manufacture of explosives; c) catastrophic failures or rare malfunctions which are beyond the concept of abnormality dealt with in this standard (see Note 5 3.7.3 and 3.7.4); d) rooms used for medical purposes; e) commercial and industrial applications where only low pressure fuel gas is used for appliances e.g. for cooking, water heating and similar uses, where the installation is compliant with relevant gas codes; f) domestic premises; g) areas where a hazard may arise due to the presence of combustible dusts or fibres combustible flyings but the principles may be used in assessment of a hybrid mixture (refer also IEC 61241-10 / IEC 60079-10-2). This standard does not take into account the effects of consequential damage. Definitions and explanations of terms are given together with the main principles and procedures relating to hazardous area classification. For detailed recommendations regarding the extent of the hazardous areas in specific industries or applications, reference may be made to national or industry codes relating to those applications. NOTE Additional guidance on hybrid mixtures is provided in Annex I. NOTE 1 Flammable mists may form or be present at the same time as flammable vapour. Liquids not considered to be hazardous in terms of this standard (due to the flash point), when released under pressure may also generate flammable mists. In such case, the strict application of area classification for gases and vapours the details in this standard may not be appropriate as the basis for selection of equipment. Flammable mists may also form when liquids not considered to be a hazard due to the high flash point are released u

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60079-10-1 (REDLINE + STANDARD)-2015 PDF

IEC 60079-10-1 (REDLINE + STANDARD)-2015 PDF

$434.42 $868.83