IEC 60092-302-2-2025 PDF

IEC 60092-302-2-2025 PDF

Electrical installations in ships-Part 302-2: Low voltage switchgear and controlgear assemblies-Marine power

$100.88 $201.76 -50%
Product Code: IEC 60092-302-2
Stock In Stock
Edition: 2.0
Published: 10/2025
Number of Pages: 28
File Size: 1 file, 459 Bytes

Available Options

Product Description

Electrical installations in ships – Part 302-2: Low voltage switchgear and controlgear assemblies – Marine power

Introduction: This part of IEC 60092 forms a series of International Standards for electrical installations in sea-going ships, incorporating good practice and coordinating, as far as possible, existing rules. These standards form a code of practical interpretation and amplification of the requirements of the International Convention for the Safety of Life at Sea, a guide for future regulations which can be prepared and a statement of practice for use by ship owners, shipbuilders and appropriate organizations. The IEC 61439 series specifies the requirements for land based low voltage switchgear and controlgear assemblies. The IEC 60092-302 series has been developed in line with Figure 201, which illustrates opportunities to develop relevant marine standards. The IEC 60092 series remains the principal series of standards for electrical installations in ships, and the applicable standards are applied accordingly. Wherever there are differences between the IEC 61439 series and the IEC 60092 series, the IEC 60092 series takes precedence. Figure 201 – Relationship of standards

Scope: This part of IEC 60092 defines the specific requirements of low voltage marine power switchgear and controlgear assemblies (MPSC-assemblies) as follows: stationary assemblies with enclosure for which the rated voltage does not exceed 1 000 V AC or 1500 V DC; assemblies intended for use in conjunction with the power generation, distribution and conversion of electric energy, and for the control of electric energy consuming equipment. Due to the marine application and the risks associated with loss of power, additional safety factors have been applied to minimise the risk of failure, such as applying an additional safety factor on clearance distances. This document applies to all assemblies whether they are designed, manufactured and verified on a one-off basis or fully standardised and manufactured in quantity. Either the manufacture or assembly, or both, of the MPSC assembly can be carried out by others than the original manufacturer. This document does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, which comply with the relevant product standards. NOTE Individual devices and components include those that are covered by the IEC 60947 series.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60092-302-2-2025 PDF

IEC 60092-302-2-2025 PDF

$100.88 $201.76