Electrical installations in ships – Part 303: Equipment – Power transformers and reactors
Introduction: The IEC 60092 series contains international standards for electrical installations in sea-going ships, incorporating good practice and co-ordinating, as far as possible, existing rules. These standards form a code of practical interpretation and amplification of the requirements of the International Convention on Safety of Life at Sea, a guide for future regulations which may be prepared and a statement of practice for use by shipowners, shipbuilders and appropriate organizations.
Scope: This part of IEC 60092 is applicable to all transformers used for power and lighting and, where appropriate, to static convertors, starting transformers, static balancers, earthing transformers, saturable reactors and transductors for use in ships, including single-phase transformers rated higher than 1 kVA, and three-phase transformers rated higher than 5 kVA, unless special requirements are specified. This document applies to transformers with rated voltage up to and including 36 kV. This document is not applicable to instrument transformers.
Contents:
- FOREWORD
- INTRODUCTION
- Scope