Electrical installations in ships - Part 352: Selection, installation, and operating conditions of cables
Introduction: IEC 60092 forms a series of International Standards concerning electrical installations in sea- going ships and fixed or mobile offshore units, incorporating good practice and co-ordinating as far as possible existing rules. These standards form: a code of practical interpretation and amplification of the requirements of the International Convention on Safety of Life at Sea; a guide for future regulations which may can be prepared; a statement of practice for use by owners and builders of ships and fixed or mobile and offshore units and other appropriate organisations. This revision of IEC 60092-352 has been prepared by Maintenance Team 1 2 of IEC SC 18A, to update and include developments identified in other parts of the 60092 series of standards applicable to electric cables for electrical installations in ships, viz:. the increase in maximum rated conductor temperature during normal operation for EPR, XLPE type insulations – see IEC 60092-351 – and the effect on current carrying capacities; the publication of IEC 60092-376 covering cables for control and instrumentation 150/250V(300V); changes in test methods to demonstrate the capability of cables to continue to operate in fire conditions and to limit the spread of flame; the inclusion of a method for the determination of current carrying capacities based upon those that have been accepted and established in other applications of cable use. This method has been derived from a technical basis and allows a greater choice of
Scope: This standard provides the basic requirements for the choice and installation of cables intended for fixed electrical systems on board ships at voltages (U) up to and including 15 kV. This part of IEC 60092 provides the basic requirements for the selection, installation and operating conditions of electrical cables intended for fixed electrical systems on board ships at voltages (U) up to and including Um 18/30 (36) kV, symmetrical category cables and fibre optic cables. The reference to fixed systems includes those that are subjected to vibration (due to the movement of the ship) or movement (due to motion of the ship) and not to those that are intended for frequent flexing. Cables suitable for frequent or continual flexing use are detailed in other IEC specifications e.g. IEC 60227 and IEC 60245, and their uses on board ship is restricted to those situations which do not directly involve exposure to a marine environment e.g. portable tools or domestic appliances. Cables subject to frequent or continual flexing use, which can withstand the mechanical stress and the environment they are exposed to, are detailed in other IEC specifications such as IEC 60227 and IEC 60245. Flexible cables are frequently used for retractable thrusters, elevators, moving decks, cranes, shore connections and other moving applications on board ships. The following cable types and applications are not included: optical fibre cables; sub-sea and umbilical cables; – data, telecommunication and radio frequency cables; selection and installation of cables for use on offshore units platforms.
Contents:
- FOREWORD
- INTRODUCTION
- Scope