IEC 60297-3-108-2014 PDF

IEC 60297-3-108-2014 PDF

Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6 mm (19 in) series-Part 3-108: Dimensions of R-type subracks and plug-in units

$132.41 $264.81 -50%
Product Code: IEC 60297-3-108
Stock In Stock
Edition: 1.0
Published: 09/2014
Number of Pages: 56
File Size: 1 file, 631 Bytes

Available Options

Product Description

Mechanical structures for electronic equipment – Dimensions of mechanical structures of the 482,6 mm (19 in) series – Part 3-108: Dimensions of R-type subracks and plug-in units

Introduction: The purpose of this standard is to establish alternative dimensions and features for subracks and associated plug-in units, compared with IEC 60297-3-101. These alternatives allow more sturdy designs for the load bearing members of the subrack. In addition, the plug-in units are with alignment pins and fastened with M3 screws. Chassis integrated subracks are also part of this standard. The main differing dimensions/features compared with IEC 60297-3-101 are: a) The subrack height aperture is decreased in order to increase the dimension for the top and bottom members (most critical load bearing parts). b) Incorporated alignment between the subrack and the plug-in units. Injecting and extracting provisions for plug-in units. c) The mounting flanges of the subracks are recessable. This feature meets the mounting requirements of heavy subracks and allows the positioning to the centre of gravity. d) Chassis integrated subracks for optimized thermal management features. e) Comparison of dimensions and features with IEC 60297-3-101 is shown in appendix D, Table D.1. For an application image of the subrack based on this standard see Figure 1. IEC 60297-3-101 Conventional form factor and normal weight, for small to medium volume applications, e.g. general industrial computing and data processing IEC 60297-3-107 Small form factor and light weight, for large volume applications, e.g. embedded systems, mobile/ubiquitous computing systems IEC 60297-3-108 Heavy weight and large form factor

Scope: This part of IEC 60297 provides dimensions and features for R-type subracks and plug-in units, i.e. ruggedized variants of the mechanical structures of the 482,6 mm (19 in) series, with enhanced vibration and shock resistance and/or improved EMC performance, for use in more harsh environment. This leads to a subrack standard which is externally compatible with IEC 60297-3-100 but internally largely incompatible with IEC 60297-3-101. R-type subracks, chassis integrated subracks and plug-in units incorporate dimensions and features which provide for a higher level of ruggedness, compared with IEC 60297-3-101 (test set-up and load definitions are selected from IEC 61587-1 and IEC 61587-5).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60297-3-108-2014 PDF

IEC 60297-3-108-2014 PDF

$132.41 $264.81