IEC 60300-3-11-2009 PDF

IEC 60300-3-11-2009 PDF

Dependability management-Part 3-11: Application guide-Reliability centred maintenance

$186.00 $371.99 -50%
Product Code: IEC 60300-3-11
Stock In Stock
Edition: 2.0
Published: 06/2009
Number of Pages: 98
File Size: 1 file, 1 Byte

Available Options

Product Description

Dependability management – Part 3-11: Application guide – Reliability centred maintenance

Introduction: Reliability centred maintenance (RCM) is a method to identify and select failure management policies to efficiently and effectively achieve the required safety, availability and economy of operation. Failure management policies can include maintenance activities, operational changes, design modifications or other actions in order to mitigate the consequences of failure. RCM was initially developed for the commercial aviation industry in the late 1960s, resulting in the publication of ATA-MGS-3 [1]2. RCM is now a proven and accepted methodology used in a wide range of industries. RCM provides a decision process to identify applicable and effective preventive maintenance requirements, or management actions, for equipment in accordance with the safety, operational and economic consequences of identifiable failures, and the degradation mechanism responsible for those failures. The end result of working through the process is a judgement as to the necessity of performing a maintenance task, design change or other alternatives to effect improvements. The basic steps of an RCM programme are as follows: a) initiation and planning; b) functional failure analysis; c) task selection; d) implementation; e) continuous improvement. All tasks are based on safety in respect of personnel and environment, and on operational or economic concerns. However, it should be noted that the criteria considered will depend on the nature of the product and its application. For example, a production proce

Scope: This part of IEC 60300 provides guidelines for the development of failure management policies for equipment and structures using reliability centred maintenance (RCM) analysis techniques. This part serves as an application guide and is an extension of IEC 60300-3-10, IEC 60300-3- 12 and IEC 60300-3-14. Maintenance activities recommended in all three standards, which relate to preventive maintenance, may be implemented using this standard. The RCM method can be applied to items such as ground vehicles, ships, power plants, aircraft, and other systems which are made up of equipment and structure, e.g. a building, airframe or ship's hull. Typically, equipment comprises a number of electrical, mechanical, instrumentation or control systems and subsystems which can be further broken down into progressively smaller groupings, as required. This standard is restricted to the application of RCM techniques and does not include aspects of maintenance support, which are covered by the above-mentioned standards or other dependability and safety standards.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60300-3-11-2009 PDF

IEC 60300-3-11-2009 PDF

$186.00 $371.99