IEC 60317-44-2010 PDF

IEC 60317-44-2010 PDF

Specifications for particular types of winding wires-Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240

$53.59 $107.18 -50%
Product Code: IEC 60317-44
Stock In Stock
Edition: 1.1
Published: 07/2010
Number of Pages: 28
File Size: 1 file, 902 Bytes

Available Options

Product Description

Specifications for particular types of winding wires – Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240

Introduction: This part of IEC 60317 forms an element of a series of standards which deals with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) methods of test (IEC 60851); 2) specifications (IEC 60317); 3) packaging (IEC 60264).

Scope: This part of IEC 60317 specifies the requirements of tape wrapped rectangular copper winding wire of class 240. The insulation consists of one or two wrappings of aromatic polyimide tape. Class 240 is a thermal class that requires a temperature index of 240 and a heat shock temperature of at least 260 °C. NOTE In some countries, e.g. Canada, Russia, USA, this product is assigned a class 220. The tape is coated on one or both sides with a suitable adhesive, for instance, fluorinated ethylene propylene. After wrapping, the tape is heat-sealed to form a continuous and adherent sheath. Specific requirements may be subject to contract. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which the wire is recommended to be used and this will depend on many factors, including the types of equipment involved. The range of nominal conductor dimensions covered by this standard is: width: min. 2,00 mm, max. 16,00 mm; thickness: min. 0,80 mm, max. 5,60 mm. The specified combinations of width and thickness as well as the specified ratio width/thickness are given in IEC 60317-0-2. When a reference is made to winding wire according to this standard, the following information should be given: reference to IEC 60317-44; dimension of the nominal conductor (width x thickness); grade. Example: 60317-44 IEC 4,00 mm x 1,00 mm grade A2

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Cut-through
  • 11 Resistance to abrasion
  • 12 Resistance to solvents
  • 13 Breakdown voltage
  • 14 Continuity of insulation
  • 15 Temperature index
  • 16 Resistance to refrigerants
  • 17 Solderability
  • 18 Heat or solvent bonding
  • 19 Dielectric dissipation factor
  • 20 Resistance to transformer oil
  • 21 Loss of mass
  • 23 Pin hole test
  • 30 Packaging

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60317-44-2010 PDF

IEC 60317-44-2010 PDF

$53.59 $107.18