IEC 60364-7-722 (REDLINE + STANDARD)-2018 PDF

IEC 60364-7-722 (REDLINE + STANDARD)-2018 PDF

Low-voltage electrical installations-Part 7-722: Requirements for special installations or locations-Supplies for electric vehicles

$171.50 $342.99 -50%
Product Code: IEC 60364-7-722 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 09/2018
Number of Pages: 82
File Size: 1 file

Available Options

Product Description

Low-voltage electrical installations – Part 7-722: Requirements for special installations or locations – Supplies for electric vehicles

Introduction: For the purpose of this part of IEC 60364 (IEC 60364-7-722) the requirements of the general Parts 1 to 6 of IEC 60364 apply. The IEC 60364-7-7XX parts of IEC 60364 contain particular requirements for special installations or locations which are based on the requirements of the general parts of IEC 60364 (IEC 60364-1 to IEC 60364-6). These IEC 60364-7-7XX parts are considered in conjunction with the requirements of the general parts. The particular requirements of this part of IEC 60364 supplement, modify or replace certain of the requirements of the general parts of IEC 60364 being valid at the time of publication of this part. The absence of reference to the exclusion of a part or a clause of a general part means that the corresponding clauses of the general part are applicable (undated reference). Requirements of other 7XX parts being relevant for installations covered by this part also apply. This part may therefore also supplement, modify or replace certain of these requirements valid at the time of publication of this part. The clause numbering of this part follows the pattern and corresponding references of IEC 60364. The numbers following the particular number of this part are those of the corresponding parts, or clauses of the other parts of the IEC 60364 series, valid at the time of publication of this part, as indicated in the normative references of this document (dated reference). If requirements or explanations additional to those of the other parts of the IEC 60

Scope: The particular requirements of this document apply to circuits intended to supply energy to electric vehicles, and circuits intended for feeding back electricity from electric vehicles into the supply network. NOTE The requirements for feeding back electricity from electric vehicles into the supply network are under consideration. Inductive charging is not covered. Circuits covered by this document are terminated at the connecting point. NOTE 1 The requirements for EV supply equipment for conductive charging and the relevant charging modes are described in IEC 61851 (all parts). The requirements for EV supply equipment for wireless power transfer are described in IEC 61980 (all parts). NOTE 2 This document does not cover the assessment of the risk of explosion due to the possible production of hydrogen/other flammable gases during the battery recharging phase. 722.2

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • Introduction

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60364-7-722 (REDLINE + STANDARD)-2018 PDF

IEC 60364-7-722 (REDLINE + STANDARD)-2018 PDF

$171.50 $342.99