IEC 60404-10-2016 PDF

IEC 60404-10-2016 PDF

Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies

$132.41 $264.81 -50%
Product Code: IEC 60404-10
Stock In Stock
Edition: 2.0
Published: 10/2016
Number of Pages: 32
File Size: 0 files

Available Options

Product Description

Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies

Introduction: Besides the fact that the first edition of this part of IEC 60404 is more than 25 years old, the main purpose of this revision is to adapt it to modern measurement and evaluation methods, in particular to introduce the widely spread digital sampling method for the acquisition and evaluation of the measured data. In addition, the problem of the air flux compensation had to be re-considered under the condition of the elevated frequencies. Capacitive coupling of mutual inductor windings require observance of significant phase shift influence and suggest consideration of the alternative method of numerical air flux compensation. An increase of the frequency range to 20 kHz was discussed by TC 68 since some manufacturers of electrical steel include this range in their catalogues. However, TC 68 decided to keep the frequency range to that defined in IEC 60404-10:1988: 400 Hz to 10 kHz.

Scope: This part of IEC 60404 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurements of a.c. magnetic properties in the frequency range 400 Hz to 10 000 Hz. The object of this document is to define the general principles and the technical details of the measurement of magnetic properties of electrical steel strip and sheet by means of an Epstein frame. The Epstein frame is applicable to test specimens obtained from electrical steel strips and sheets of any grade. The AC magnetic characteristics are determined for sinusoidal induced voltages, for specified peak values of magnetic polarization and for a specified frequency. The measurements are to be made at an ambient temperature of (23 ± 5)°C on test specimens which have first been demagnetized. NOTE Throughout this document the term "magnetic polarization" is used as defined in IEC 60050-221. In some standards of the IEC 60404 series, the term "magnetic flux density" was used.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60404-10-2016 PDF

IEC 60404-10-2016 PDF

$132.41 $264.81