IEC 60404-14-2002 PDF

IEC 60404-14-2002 PDF

Magnetic Materials - Part 14: Methods of Measurement of the Magnetic Dipole Moment of a Ferromagnetic Material Specimen by the Withdrawal or Rotation Method

$50.44 $100.88 -50%
Product Code: IEC 60404-14
Stock In Stock
Edition: 1.0
Published: 06/2002
Number of Pages: 36
File Size: 1 file, 548 Bytes

Available Options

Product Description

Magnetic Materials - Part 14: Methods of Measurement of the Magnetic Dipole Moment of a Ferromagnetic Material Specimen by the Withdrawal or Rotation Method

Introduction: The magnetic dipole moment j of a ferromagnetic material specimen is a useful parameter for comparing properties, particularly of permanent magnet materials. The measurement of the saturation magnetic dipole moment per unit mass (specific saturation magnetic polarization σs) is a special case widely used to characterize cemented carbide metals. Whilst these materials are essentially non-magnetic in character, cobalt or nickel is used as the binder and it is required to achieve an optimum composition and geometrical arrangement of the binder phase with high reproducibility. The determination of the specific saturation magnetic polarization has gained acceptance in the carbide metal industry as a simple, fast and non- destructive measurement method. The measurement of magnetic moment is, within broad limits, independent of the shape and size of the test specimen. If the material, as in the case of cemented carbide metal, contains only one ferromagnetic component (cobalt or nickel), it is possible to determine its percentage proportion with high resolution. Another useful parameter which can be derived from the measurement of the magnetic dipole moment of a test specimen and its volume V is the magnetic polarization J. The value of saturation magnetic polarization is of particular interest for certain magnetic materials. Spherical, ellipsoidal and cylindrical reference specimens of nickel of measured saturation magnetic polarization are used in the calibration of vibrating sampl

Scope: This part of IEC 60404 is applicable to all ferromagnetic materials. It is particularly aimed at the measurement of the magnetic dipole moment of permanent magnet (magnetically hard) materials and the measurement of the specific saturation magnetic polarization of cemented carbide materials having a ferromagnetic binder. The object of this part is to describe the general principles of the determination of the magnetic dipole moment of a ferromagnetic material specimen using a detection coil in an open magnetic circuit. By including a means of magnetizing the material to saturation, the saturation magnetic dipole moment can also be determined. In addition, the average magnetic polarization of a test specimen can be derived from the measurement of its magnetic dipole moment and volume. The calibration of magnetic moment coil systems and the measurement of the magnetic dipole moment of feebly magnetic materials can also be determined using this method. Measurements are normally performed at room temperature but measurements at other temperatures can be conducted by heating or cooling the volume occupied by the test specimen within the detection coil. The measurement of remanence, coercivity, maximum energy product and other parameters can be made in a closed magnetic circuit as described in IEC 60404-4 and IEC 60404-5. Measurement of the coercivity HcJ of soft and semi-hard materials can also be performed in an open circuit as described in IEC 60404-7.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60404-14-2002 PDF

IEC 60404-14-2002 PDF

$50.44 $100.88