Guide for determining the effects of ionizing radiation on insulating materials Part 1: Radiation interaction
Introduction: The establishment of suitable criteria for the evaluation of the radiation resistance of insulating materials is very complex, since such criteria depend upon the conditions under which the materials are used. For instance, if an insulated cable is flexed during a refuelling operation in a reactor, the service life will be that time during which the cable receives a radiation dose sufficient to reduce to a specified value one or more of the relevant mechanical properties. Temperature of operation, composition of the surrounding atmosphere and the time interval during which the total dose is received (dose rate or flux) are important factors which also determine the rate and mechanisms of chemical changes. In some applications, temporary changes may be the limiting factor. Given this, it becomes necessary to define the radiation fields in which materials are exposed and the radiation dose subsequently absorbed by the material. It is also necessary to establish procedures for testing the mechanical and electrical properties of materials which will define the radiation degradation and link those properties with application requirements in order to provide an appropriate classification system.
Scope: This part of IEC 60544 deals broadly with the aspects to be considered in evaluating the effects of ionizing radiation on all types of organic insulating materials. It also provides, for X- rays, γ-rays, and electrons, a guide to dosimetry terminology, methods for dose measurements, testing carried out at irradiation facilities, evaluation and testing of material characteristics and properties, documenting the irradiation process. Dosimetry that might be carried out at locations of use of the material is not described in this standard.
Contents:
- FOREWORD
- INTRODUCTION
- Scope