IEC 60671-2007 PDF

IEC 60671-2007 PDF

Nuclear power plants-Instrumentation and control systems important to safety-Surveillance testing

$100.88 $201.76 -50%
Product Code: IEC 60671
Stock In Stock
Edition: 2.0
Published: 05/2007
Number of Pages: 54
File Size: 1 file, 420 Bytes

Available Options

Product Description

Nuclear power plants – Instrumentation and control systems important to safety – Surveillance testing

Introduction: a) Background, main issues and organization of the standard A fundamental requirement for I&C (instrumentation and control) systems important to safety in nuclear power plants is that they be capable of being demonstrated to be ready to perform their safety functions if needed. Surveillance testing may be performed by the execution of functional tests or by self-supervision within the I&C systems important to safety, and is augmented by diagnostic functions and by visual inspections of the I&C systems and their status indicators by the plant operation staff. Depending on the reliability targets and the testing conditions the demonstration of functional readiness may be performed either while the plant is on-line or during plant shutdown. This Standard provides technical requirements and recommendations for the implementation of surveillance testing for I&C systems important to safety. The object of this standard is: in Clause 4: to establish the principles for surveillance testing of I&C equipment important to safety. in Clauses 5 through 9: to give requirements to be fulfilled in the design and operation of I&C equipment important to safety in regards to the surveillance testing. b) Situation of the current standard in the structure of the SC 45A standard series IEC 61513 establishes the top level requirements for I&C systems and equipment important to safety. Among these requirements is the need to demonstrate, on a continuing basis, the operability of the equipment and its

Scope: Where functional reliability is required by general safety standards, one aspect of demonstrating this reliability is testing performed on-line during plant operation or during plant shutdown in preparation for return to power operation. This standard lays down principles for testing I&C systems performing category A, B and C functions, per IEC 61226, during normal power operation and shutdown, so as to check the functional availability especially with regard to the detection of faults that could prevent the proper operation of the functions important to safety. It covers the possibility of testing at short intervals or continuous surveillance, as well as periodic testing at longer intervals. It also establishes basic rules for the design and application of the test equipment and its interface with the systems important to safety. Further, the effect of any test equipment failure on the reliability of the I&C systems is considered. Types of surveillance tests may include: self-tests for I&C equipment; test of a group of equipment or components to confirm properties that support the safety function (continuity, power availability, etc.); test based on information redundancy or comparison of control signatures (consistency checking for redundant sensors, CRC-checking, Checksum, etc.); periodic testing which is related to the correctness of functional behaviour of an I&C system. The dependability targets of any I&C system is reached using an appropriate combination of tests of the form indicated above. The extent of the I&C system to be tested is from the interface of the sensors with the process through to the actuation devices (see Figure 1). It is applicable to the installed I&C systems as well as to temporary installations which are part of those I&C systems important to safety (for example, auxiliary equipment for commissioning tests and experiments). This standard also applies to individual electromechanical equipment, such as relays and solenoid actuators. Additional testing and inspections may be performed on I&C equipment for purposes other than the demonstration of functional capability, such as to optimise preventive maintenance, etc. Such tests are beyo

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 6.10 Surveillance
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60671-2007 PDF

IEC 60671-2007 PDF

$100.88 $201.76