Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
Introduction: Fire safety engineering Fire safety engineering (FSE) is the application of engineering methods based on scientific principles to the development or assessment of designs in the built environment through the analysis of specific fire scenarios or through the quantification of risk for a group of fire scenarios. Typical objectives of FSE are: a) to protect life safety, b) to protect property, c) to maintain the continuity of operations, d) to protect the natural environment, and e) to preserve heritage. The analysis of FSE is usually based on calculations that use input data obtained principally from quantitative fire tests as described in IEC 60695-1-11. Fire safety engineering (FSE) is a discipline increasingly being used in support of performance- based national fire safety regulations in many states and regional jurisdictions throughout the world. The eight parts of ISO/TR 13387 (see Clause 2 and [1] to [6]) and ISO 23932 outline the fundamental methodologies and uses of FSE. Further detailed aspects of FSE are covered in ISO 16730 [7], ISO/TS 16732 [8], ISO/TS 16733, ISO 16734 [9], ISO 16735 [10], ISO 16736 [11], ISO 16737 [12] and ISO/TR 16738. ISO 23932-1 [1]1, developed by ISO TC 92/SC 4, outlines the fundamental methodologies and uses of FSE. Further detailed aspects of FSE are covered in ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8]. In addition to performance-based regulations, many nations
Scope: This part of IEC 60695 is intended as a general guideline for IEC Product Committees and provides specifies methodologies of fire safety engineering for electrotechnical products by providing: an explanation of the principles and uses of fire safety engineering; guidance on the use of fire safety engineering in the design of electrotechnical products; fire safety engineering terminology, and concepts; an indication of properties, data and tests needed for input into fire safety engineering assessment; and informative references. This document is not intended to be a detailed technical design guide, but is intended to provide guidance for product committees on fire safety engineering methods and performance-based tests for use in performance-based designs and fire hazard assessments of electrotechnical materials, assemblies, products and systems. More detailed information on fire safety engineering is contained in the ISO/TR 13387 series of documents (see Clause 2 and [1] to [6]) and in ISO 23932 in ISO 23932-1 [1]. NOTE Further detailed aspects of FSE are covered in ISO 16730 [7], ISO/TS 16732 [8], ISO/TS 16733, ISO 16734 [9], ISO 16735 [10], ISO 16736 [11], ISO 16737 [12] and ISO/TR 16738 ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8]. This basic safety publication focusing on safety guidance is primarily intended for use by technical committees in the preparation of standards safety publications in accordance with the principles laid down in IEC Guide 104 [39] and ISO/IEC Guide 51 [40]. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This document has the status of a horizontal publication in accordance with IEC Guide 108 [43].
Contents:
- FOREWORD
- INTRODUCTION
- Scope