IEC 60706-5-2007 PDF

IEC 60706-5-2007 PDF

Maintainability of equipment-Part 5: Testability and diagnostic testing

$239.59 $479.18 -50%
Product Code: IEC 60706-5
Stock In Stock
Edition: 2.0
Published: 09/2007
Number of Pages: 130
File Size: 1 file, 1 Byte

Available Options

Product Description

Maintainability of equipment – Part 5: Testability and diagnostic testing

Introduction: Testability is an important feature in the operation and maintenance of a system or equipment and has a significant effect on its availability and maintainability. Diagnostic testing may be carried out manually or with test equipment which may contain various levels of automation. Optimum design for testability requires close cooperation between design, operation and maintenance organizations. This standard is intended to highlight the various aspects of testability and diagnostic testing and to assist in their timely coordination. In this standard, items to be considered in respect of their testability design may be systems, equipment or functional units which are the objects of a contract, and will be referred to as "products". Each product has to perform its required functions which should be verified during the development and production phases and should be retained over the whole life cycle. For a product to retain its functionality, the functional status of each sub-function should be known at any time while the product is in its operating condition. If a failure occurs, action should be taken to ensure that the fault is recognized and the faulty item localized. This requirement placed on the testability of a product might appear to be quite simple, but if it is not considered at the start of product development, subsequent realization will result in increased work and significantly increased cost. If all requirements are available at the start of development, the deve

Scope: The purpose of this part of IEC 60706 is to provide guidance for the early consideration of testability aspects in design and development; assist in determining effective test procedures as an integral part of operation and maintenance. This International Standard can be applied to all types of products which may include commercial off-the-shelf (COTS) items. In this respect, it does not matter whether the product belongs to mechanical, hydraulic, electrical or some other technology. In addition, this International Standard applies to the development of any products, with the aim of designing the product characteristics so that they are verifiable (testable). The objective of this International standard is to ensure that prerequisites relating to the testability of products are defined in the preliminary phases of development, laid down by the customer, implemented, documented and verified during development. This International Standard also provides methods to implement and assess testability as an integral part of the product design. It recommends that the product testability documentation should be continually updated over the product's life cycle.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60706-5-2007 PDF

IEC 60706-5-2007 PDF

$239.59 $479.18