IEC 60755-1-2022 PDF

IEC 60755-1-2022 PDF

General safety requirements for residual current operated protected devices-Part 1: Residual current operated protective devices for DC systems

$163.93 $327.86 -50%
Product Code: IEC 60755-1
Stock In Stock
Edition: 1.0
Published: 10/2022
Number of Pages: 36
File Size: 1 file, 1 Byte

Available Options

Product Description

General safety requirements for residual current operated protected devices – Part 1: Residual current operated protective devices for DC systems

Introduction: Residual current devices are used for protection against electric shocks. In IEC 60364 (all parts), residual current devices are used for automatic disconnection of supply in case of fault (see Clause 411 of IEC 60364-4-41:2005+AMD1:2017) and residual current devices with rated residual operating current not exceeding 30 mA are used as additional protection (see Clause 415 of IEC 60364-4-41:2005+AMD1:2017). The IEC has developed a set of standards for residual current operated protective devices intended to be used in AC systems. DC systems are used for applications such as photovoltaic installations, data and telecom centres and electric vehicle charging systems. In addition, standards for plugs and socket- outlets for ICT equipment installed in data centres and telecom centres have been published. Residual current devices for DC systems are used to provide fault protection and/or additional protection (according to IEC 60364-4-41:2005 and IEC 60364-4-41:2005/AMD1:2017). This document defines the operating characteristics for residual current operated protective devices for DC systems. Details of how they should be installed to provide the desired level of protection are specified in the various parts of the IEC 60364 series. The operating characteristics given in this document are based on the information contained in IEC 60479 (all parts). This document has been prepared as a Group Safety Publication by subcommittee 23E in accordance with its Group Safety Function for resi

Scope: This document gives requirements, recommendations and information for the drafting of standards for residual current operated protective devices, intended to be used in DC systems, hereafter referred to as DC-RCDs. NOTE 1 When referring to IEC 60755, "RCD" shall be understood as "DC-RCD". This document is primarily intended to be used as a reference for drafting product safety standards for: DC-RCD intended for general use; DC-RCD specifically intended to be incorporated in a specific item of equipment; DC-RCD embedded in an equipment. This document is applicable for standards covering devices: which detect a residual current, compare it to a reference value, and open the contacts when the residual current exceeds this reference value. Any association of devices, each one of them performing separately one or two of the above- mentioned functions but acting together in order to accomplish all three functions, is also covered by this document. DC-RCDs are intended to provide fault protection, the exposed conductive parts of the installation being connected to a protective conductor, in accordance with IEC 60364-4-41:2005 and IEC 60364-4-41:2005/AMD1/2017. DC-RCDs having a rated residual operating direct current not exceeding 80 mA and having a rated voltage not exceeding 220 V DC for single-pole or 440 V DC for two-pole are also used as a provision for additional protection, according to IEC 60364-4-41. NOTE 2 Further requirements for higher voltages are under consideration. NOTE 3 The value of 80 mA was the result of a calculation based on the content of clause 6 of IEC 60479-1:2018 and 5.3.4 of IEC 60479-2:2019. NOTE 4 In Austria the value of 80 mA is considered as provisional until a broader and more solid set of data than the actual basis of the IEC 60479 series is available for DC. In accordance with IEC 60364-4-42, residual current devices with a rated residual operating current not exceeding 300 mA can also be used to provide protection against fire hazards due to insulation faults. DC-RCDs are suitable for isolation. They are suitable for use in TN, TT, and, under specific conditions, IT systems. IEC 60755-1:2022 © IEC 2022 – 7 – DC-RCDs are resistant to u

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60755-1-2022 PDF

IEC 60755-1-2022 PDF

$163.93 $327.86