IEC 60853-1-1985 PDF

IEC 60853-1-1985 PDF

Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36)kV

$85.12 $170.24 -50%
Product Code: IEC 60853-1
Stock In Stock
Edition: 1.0
Published: 01/1985
Number of Pages: 42
File Size: 1 file, 1 Byte

Available Options

Product Description

Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36)kV

Introduction: This standard gives methods for calculating the cyclic rating factor for cables where the internal thermal capacitance can be neglected. The method is based on the simplified procedure published in a CIGRÉ document. * It is intended to issue a second part detailing the full method (a brief résumé of which is set out in Appen- dix A) which will provide for those cables where the thermal capacitance should be included. This second part will also include methods for the calculation of emergency ratings. The simplified methods in this standard require only a knowledge of the full shape of the load variation for not more than 6 h immediately preceding the time of maximum temperature and an average value for times before that. This reduces the amount of work involved, but places some restrictions on the type of cable and shape of load cycle that can be dealt with. The methods can be applied to all sizes and types of cable for nominal voltages up to and including 18/30 (36) kV, with any shape of load cycle, when the margin of error is not expected to exceed 5% on the safe side. Criteria for limited application of these simplified methods to cables for higher voltages are given in Clause 6. Change in conductor resistance with temperature is neglected. This can be shown to result in a small error on the safe side. 1. Scope No account has been taken at present of possible effects of moisture migration on the thermal resistivity of the soil. This is in line with the approach already ado

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 3.1 Single isolated circuit
  • 3.2 Group of cables with equal losses, cables or ducts not touching
  • 3.3 Group of circuits of three equally loaded, identical, touching cables or ducts having

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60853-1-1985 PDF

IEC 60853-1-1985 PDF

$85.12 $170.24