Plugs and socket-outlets for household and similar purposes – Part 2-2: Particular requirements for socket-outlets for appliances (Extended Version)
Scope: This part of IEC 60884 applies to socket-outlets for AC only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, which are integrated or intended to be incorporated in or fixed to appliances, hereafter referred to as socket-outlets for appliances. Compatible plugs and socket-outlets, when combined, form a plug and socket-outlet system. Standardized systems used around the world are reported in IEC/TR 60083. The rated current is limited to 16 A maximum for accessories provided with screwless-type terminals. This document covers only those requirements for mounting boxes which are necessary for the tests on the socket-outlet. NOTE 1 Requirements for general purpose mounting boxes are given in IEC 60670-1. This document also applies to: plugs which are a part of cord sets; plugs and portable socket-outlets which are a part of cord extension sets; plugs and socket-outlets which are a component of an appliance, unless otherwise stated in the standard for the relevant appliance; and plugs and socket-outlets incorporating pilot lights. Socket-outlets for appliances are intended to be used in stationary equipment and appliances, for example, in office machines, ICT equipment, range (cooker) hoods, ranges, etc. If necessary, the use of socket-outlets for appliances is indicated in the standards for the appropriate equipment or appliance. This document does not apply to: plugs, socket-outlets and couplers for industrial purposes; appliance couplers; plugs, fixed and portable socket-outlets for extra low voltage (ELV); NOTE 2 ELV values are specified in IEC 60364-4-41. fixed socket-outlets combined with fuses, automatic switches, etc. Plugs of this document are intended to be energised by socket-outlets. NOTE 3 Use in any other manner could result in unsafe conditions within the installation if proper precautions are not taken. When energy producing equipment is connected to the fixed installation via plugs of this document all safety aspects of the products and the installation need to be evaluated by the manufacturer of the energy producing equipment. IEC 60884-2-2:2025 EXV © IEC 2025 – 9 – Plugs and socket-
Contents: