IEC 60947-6-1 (REDLINE + STANDARD)-2026 PDF

IEC 60947-6-1 (REDLINE + STANDARD)-2026 PDF

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

$434.42 $868.83 -50%
Product Code: IEC 60947-6-1 (REDLINE + STANDARD)
Stock In Stock
Edition: 4.0
Published: 04/2026
Number of Pages: 200
File Size: 1 file

Available Options

Product Description

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

Introduction: The availability of power in low voltage electrical installations is playing an ever increasing role in modern society. In fact, this requirement is a fundamental characteristic for the creation of economically and functionally efficient installations. A system able to switch a load from one source to another safely and with minimum disturbance to the load reduces problems caused by faulty conditions in the normal supply to the minimum. All these operations, commonly known as "transfer switching", control the installations and can be done automatically, remotely or manually. Therefore, an installation with installed "transfer switching" capability: ensures the continuity of production processes; provides a backup source of power if the main network is out of service; reduces the effect caused by network faults on parts of the installation; achieves a good compromise between reliability, simplicity and cost-effectiveness; provides the facility manager and managing system with a power source able to supply all or part of the installation. Key factors motivating customers to use Transfer Switch Equipment (TSE) include: the continuous world growth population, the increasing number of electronic devices and the new demands of electric vehicles; the mediated pressure on climate change with a resulting increase in the cost of energy; the evolution of the electricity market with a greater number of alternate energy sources; the user’s expectations of better grid reliability, better e

Scope: This document applies to transfer switching equipment (TSE), to be used in power systems for ensuring the continuity of the supply and allowing the energy management of the installation, by transferring a load between power supply sources, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC. Specific requirements for bypass/isolation transfer switch equipment are given in Annex C, ATSE having closed transition capability are given in Annex D, stand-alone ATS controllers are given in Annex E, and TSE for electric driven fire pump controllers are given in Annex F. It covers: manually operated transfer switching equipment (MTSE); remotely operated transfer switching equipment (RTSE); automatic transfer switching equipment (ATSE), including the controller; stand-alone ATS controllers; bypass/isolation transfer switch equipment (BTSE); ATSE having closed transition capability; fire pump TSE. It does not cover: TSE configurations that are either not fully manufacturer type tested and/or not marked according to this document as a complete transfer switch; auxiliary contacts (for guidance, see IEC 60947-5-1); transfer switches used in explosive atmospheres (for guidance, see IEC 60079 (all parts)); embedded software design (for guidance, see IEC TR 63201); cybersecurity aspects (for guidance, see IEC TS 63208); TSE rated for direct-on-line starting asynchronous motor of design NE and HE, according to IEC 60034-12:2016. (for guidance, see AC-3e utilisation category according to IEC 60947-4-1:2018); other types of TSE under consideration including closed transition TSE, overlapping neutral TSE, multi-source TSE (i.e. TSE with more than two sources of supply), stand-alone ATS controllers, bypass isolation TSE, TSE with load-shedding functions, bus-tie TSE, and hybrid TSE; static transfer switches covered by IEC 62310 series. NOTE TSE used for safety services and for emergency escape lighting systems as described in IEC 60364-5-56 are subject to specific rules and/or legal requirements. The object of this document is to state: a) the required characteristics of the equipment; b) the conditions with which the equipment is to comply with respect to: 1) operati

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60947-6-1 (REDLINE + STANDARD)-2026 PDF

IEC 60947-6-1 (REDLINE + STANDARD)-2026 PDF

$434.42 $868.83